Could someone tell me a quick method to 'go to' G54 position on a next generation control.
Thanks in advance.
Type: Posts; User: cpl
Could someone tell me a quick method to 'go to' G54 position on a next generation control.
Thanks in advance.
Thanks for the reply.
Would I be correct in saying that the reason a true gear tooth cutting machine would rotate the gear is so that you can cut any tooth profile using just a short selection of...
Has anyone succesfully cut involute curves using a form tool and a 4th axis?
Can it be done?
I have a VMX 24
Thanks for the tip, i'll change the graphics card as soon as I can i'll also check out the mastercam forum.
Thanks again
It works!!!!!! thanks a lot bowman, i'm new to Mastercam and am working through a training manual but unfortunately the manual doesn't help if something does not work, thanks again
Also, try...
Is this the correct info?
Intel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 12/12/2009
Report Time[hr:mm:ss]: 23:30:57
Driver Version: 6.14.10.4859
Operating...
Here are the video card settings
http://img502.imageshack.us/img502/4301/sysconfig.th.jpg
I can't find my graphics card settings
I tried closing the software and reopening backplot works ok but not verify
I hope this works!
http://www.mediafire.com/?0hwem2rmnwr
Thanks for your help
I'm having trouble uploading the file can I email it to you?
Backplot works fine!
I'm hitting the machine arrow.
As soon as I hit it all of the other arrows are grey'd out except the rewind arrow.
Hi Mike,
Thanks for the reply yes I did define a stock boundary but as soon as I hit the verify button the geometry dissapears.
http://yfrog.com/89mastercamj
I have a problem when I try to verify in X3 whenever I click on the play button nothing happens anyone have any idea what the problem could be?
Thanks in advance