Thanks, everyone for your responses (and verifying it was possible)!
I've figured out the model must be located above the zero plane for the toolpath to properly cut the center holes.
Now it works...
Type: Posts; User: skineffect
Thanks, everyone for your responses (and verifying it was possible)!
I've figured out the model must be located above the zero plane for the toolpath to properly cut the center holes.
Now it works...
Hi Gerry
Thanks for your reply! Here is the model file.
Aspire file is on a network share that is disconnected at the moment...
Unfortunately, same as above.
This is what I've tried so far.
Same exact thing. I'd have at least expected it would cut something out of the hole... However, it remains untouched.
Thanks for the replies...
The pockets you see have a ~3deg draft angle on all sides. That is why I've used a 3D toolpath.
I tried to generate the 3D toolpath based on a vector boundary, but it...
Maybe someone can help me with this issue. I have an STL which has several rectangular pockets and a 20mm hole in the center of each pocket.
The rectangular pockets work just fine, but the center...