534,875 active members*
3,302 visitors online*
Register for free
Login

Search:

Type: Posts; User: wardygb

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    471

    Re: Maho 600 c rotary table

    Hi, the error says the difference between actual position and programmed/expected position is too high. Are there any other alarms ?
  2. Replies
    1
    Views
    103

    Re: Dmu monoblock 85

    Any errors on screen ?
  3. Replies
    0
    Views
    410

    Re: Maho MH600E Error 0 23, I 05

    Hi do you still have this problem?
    There is normally a reference switch on the tool magazine, if this is faulty the magazine cannot reference and position properly
    A t b
  4. Replies
    1
    Views
    207

    Re: E5 error millplus control

    Proximity switch on the swarf conveyor :-)
  5. Re: Deckel maho 60T TNC 426/430 magasin problem

    Hi, I think you need to check first your tool table and then the pocket table.
    If a tool is in the pocket table in position 1-20 then your machine should then go to the magazine.
    If the tool does...
  6. Thread: MAHO 1000C -84

    by wardygb
    Replies
    2
    Views
    124

    Re: MAHO 1000C -84

    Hi Mike
    Both alarms one from the measuring systems, as there are two axes in error check the power supplies.
    Best regards
  7. Re: DMG DMU103V Siemens 840D How to Format and build new HD from DMG Factory Discs?

    Hi, you have to build the disk first, no ally there is a ghost image of the hard disk with the machine,fitted to the mmc and then the Dmg cycles loaded. Do you have any *.gho files on or with the...
  8. Replies
    1
    Views
    240

    Re: MAHO Error Z 07 Z 02 HELP

    Hi Garmata, check the measuring system as this is the cause of the Z02 alarm
    All the best
  9. Re: Dmg mori 80U (1999) millplus E252 error

    Hi, this just says there is a tool in the tool gripper, depending on the version of machine, you may have a proximity switch on the gripper giving you an incorrect status. Check and see if there are...
  10. Re: DECKEL MAHO / DMU 50V 5 axis / MillPlus V310 / IDE HDD Image file wants

    Hi, the OS is only available from DMGMori, there are a number versions, once you fit the disk, you then have to rebuild the parameters from a backup. I do these in the uk and it is not something I...
Results 1 to 10 of 10