Search:

Some chinese drivers' dipswitches are counter-intuitive and use 1 as OFF and 0 as ON, maybe that's the problem and you have the switches inverted?

The translation from Ludara is pretty good, but I'll add a few observations/corrections:


2 "V-Bit max. flute diameter" "V-Bit diámetro máximo de flauta."
"Máximo diámetro de labios de fresa en...

Please delete (was an accidental copy of the previous post), thanks.

I can help you. I won't do it right now since I'm falling asleep, but I'll take a look at it during the day.

All limit switches should be NC, this way any wiring problem (broken wire, loose connector) is detected at the right time so the risk of crashing the machine is greatly reduced.

Corta dos cuadrados iguales lo más grande que puedas y luego pon una sobre la otra, pero la segunda de frente a la primera (o sea que las caras de la madera que miraban al techo estén en contacto),...

Con lo que aquí conocemos como cola fría (la de color blanco) he tenido muy buenas experiencias con MDF, pega perfecto (a tal punto que por lo general se rompe el MDF si es que intento separarlas,...

I open the cookie and then eat both sides untouched (including the cream), now beat THAT!

I bet spraying a little WD40 would do wonders to improve the Oreo's surface finish :D

I don't know how to feel about this video, I want to like it but... what a waste of good cream :violin:

How come nobody has mentioned the almighty SuperPID? :cheers:

Is the X axis using SBR too, and dual belts?

Nice! What rails are you using for X? What's the reduction ratio for the drives?

I imagine that by your standards this is considered a small machine :D

From the picture, it seems like they are supports for the table so it can overhang, so the full working area of the machine can be used.

The ADA says they are bad for children's teeth. I'd eat them anyway, I'm a big boy now.

Radioactive banana porn?

Wow, I should file a patent :idea:

Let me give you a real world example:

At school my grades at math were around 6.8 (out of 7), trigonometry was a piece of cake and one of my favorite subjects. However, 12 years later I can't...

Check the Misumi 60x60mm "heavy" extrusion (30mm slot separation), they should be a good match for the rails, and are thicker than other extrusion such as Bosch Rexroth and 8020. 60x30 would not be...

Looks like a nice projector! It's pretty clear that you enjoy building stuff, that's the first step to get things made right! :). I made a (more basic) projector a few years ago but got tired of it...

That's a great thing to do. I get most of my mechanical components from China and one thing I've noticed is that there's a tendency to go cheap with fasteners on components such as SBR rails and...

I absolutely agree with Gerry. Anyway, if you want a production machine, your best bet is to spend extra and get a machine capable of continuous work such as those from CNCRP, with good support and a...

Hola, ¿al final pudiste encontrar una solución definitiva a tu problema?

¡Saludos!

If two sides are at 90º relative to the surface of the material and the other two are in an angle (which would cause offset edges like in the pictures) it might be bad tramming, check that both the Z...

The G540 will provide 3.5A if there's no resistor or the resistor is > 3.5K
The problem with the above if that, even is the motors are rated at 3.5A, under that condition there's no current...

That 300W motor seems like a DC motor with an ER11 chuck installed. The spindle motors most people talk about here are the watercooled 3-phase motors meant to be used with a matching VFD (which...

EKRoboter está en Argentina, son importadores de perfiles ITEM.

Ojo que 8020 Inc. no vende directamente (que yo sepa), pero tienen infinidad de distribuidores en EEUU.

La serie pesada de Misumi...

I'd remove the stepper and spin the screw by hand to check for any tight spots.

Puedes preguntar aquí:

Robots Industriales, Automación, Automatización y Movimiento de Materiales, Celdas Robotizadas de Soldadura, Corte y Pulido y Palletizado/Paletizado, Encajado, Estuchado y...

Are the Z axis rails and the bit itself at perfect 90º relative to the X/Y plane? The machine might need tramming.

Yes, you can use them like that, no problem at all.