502,764 active members
4,363 visitors online
Register for free
Login

Search:

Type: Posts; User: Martin1967

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    59

    Question About EasyMark by Uli

    Hi,

    Uli maybe you read this, you asked me about EasyMark installation, I can help but your PM is blocked :-(


    Best regards,

    Martin

    I did send you a visitor message
  2. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Hi,

    The fiber look really bad... Best thing is to try to make a better cut with the special tool.

    Best regards,

    Martin
  3. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Remove the fiber cable and take a look, Now it is not working anny way.


    the tool should be easy to find local/online.
    I am located in Rotterdam

    Best regards,

    Martin
  4. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    I wil leave the discussion for a few day's now I have a big job to do and leave for the weeken.
    Try the fiber thing and we talk next week

    Best regards,

    Martin
  5. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Pytron has nothing to do with the laser, that is an external moving axis that you do not have.

    I looked at IMG_20160428_121216.jpg and saw 1064 nm this is strange, can you remove the lens and make...
  6. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    You see only one light, but it is a comunication fiber that transmit information at 30Khz puls frequency.
    Maybe you can ask him for info of the service history of this laser ??
  7. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    "keep the cable plugged into the computer and tighten the screws and then just loosen the center screw of it and move it back and forth in and out and watch the screen for any changed"

    That is...
  8. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Yes they can be re cut , Ideal you need a fiber kabell cutter tool, it is a smal kind of knive with holes in the site '
    Cutting with a exacto knife is possible but not easy to get a straight cut
    ...
  9. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    The bright one is the LED sender, the other one is the return light from the head this is weaker it is a reciever

    Try to move around and also move the cable it self to different positions It takes...
  10. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Temp not oke wil leave after few minuts when head heats up. There is a heating element inside, no problem...
  11. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Plug it in without closing the cover, screw it in place so it can not drop out
    Loosen the center screw and move around till LED is off

    Close the working axis and leave it, only move the non...
  12. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Can you move with the plug in the PC ?, power off the system when removing and puting back the SDHC connector !
    See posts before

    I can not see it clearly :-)
    What i can see is that the bottom...
  13. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Becarful, there are 3 screws , remove the outer 2 to get at the center screw that is unther the wires
  14. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Leave the window open , it works in realtime

    Looking at the pictures, it is hard to see, just try it.
  15. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    I think you should adjust this.
    It is the only thing you can do
  16. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Sometimes on verry old sytems, I do the folowing:

    -Leave the plastic covers of
    -Remove the cable holder part and leave it of.
    -Make shure the plug is in with both screws so it can not drop out....
  17. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    As for the LED's, are you referring to the power supply lights for the deflection head or that box with the three led's? What appears to be happening is that if the cabinet is moved around the...
  18. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    The second sugestion is a bit more difficult.
    I saw that the head was disconected from the cabinet during transport.

    If you remove the plastic coverss of the SHDC connectors You can see that the...
  19. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Sorry about the double questions, but I just found out that my popup blocker works a bit to well :-)

    The galvo thing, if it is broken, you get more led's..
    1 test:
    Shut down the system, open PC ...
  20. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Oke,

    I saw som screen shots from Setup.

    Deselect the X and Y axis, this is for external axis

    At CO2, click on standard functions

    The parameters are strange, but you are correct they...
  21. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    No raster info is not relevant
    What deflection head error ??

    Press in monitor on the defl, head.
    This opens a test screen for the head.

    Do not press x test or y test, this is for a special...
  22. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Hello Xavior,

    You have found the correct info :-)
    Your field is a circle with a diameter of 70mm ,and scan SMG 10 A128.pdf shows the sn. of the system But is a older number that is not on the...
  23. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    Now I see the screen shot,

    Your system is working !!

    Light on the cabinet is probably broken...

    ----

    Now you should read the LaerCad manual and start marking.
    Use the program : Control...
  24. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    No number in your documentation...

    Here is the picture for the ILK, do you have this red light with the grey cable ??


    http://www.cnczone.com/forums/attachment.php?attachmentid=318270&stc=1
    ...
  25. Re: Rofin Starmark C02 Laser, 10w Air Cooled - Need Help with Software!

    I have here about 20Mb of pdf's how to use LaserCad and laser engraving with our lasers in general.
    Can I upload to your app.box ???
Results 1 to 25 of 38
Page 1 of 2 1 2