If you only use 1 at a time, can SharkCad Pro 12 be installed on a desktop,
and a laptop, or shop PC? I can't locate the E.U.L.A to view.
Thanks
Type: Posts; User: metalfixer
If you only use 1 at a time, can SharkCad Pro 12 be installed on a desktop,
and a laptop, or shop PC? I can't locate the E.U.L.A to view.
Thanks
Hi Jim,
Some things to consider on small holes,:
Pierce Height, Lead-in and Lead-out, Offset, Offset-in, Offset-out, or
no Offset, voltage, travel speed,torch height
Hypertherm 'Fine Cut...
Hi Jim,
Our shop uses Hypertherm 'Fine-Cut' consumables, but 1/4' holes in 11ga. 304 would be hard to do if
you want laser quality.
Good edge quality needs a good drive system, clean, dry air, and...
Thanks for the videos, looking forward to part 4.
I use both, Mach3 on a plasma cutter and Mach4 on a milling machine.
Mach4 doesn't use the parallel port, and seems to process instructions
faster.
Both work well for me, Mach4 is easier to edit...
Does the 1100MX have linear rails now?
Wasn't mentioned on the website.
Larry
Might get some ideas from Sherline, don't know how large your cam shafts are.
https://www.sherline.com/product/8650-cnc-cam-grinder/
Larry
Hi Sam, and welcome to the Forum. Lots of good information on building machines, check out some of the posts.
Where are you located?
Larry
Thanks knacker99, that is helpful to know.
Larry
If you are going to purchase Mach4, the best hassle free place to register and track your licenses,
in my opinion is:
https://www.machsupport.com/shop/mach4-hobby/
Larry
I just checked my account, and you are allowed a license on at least 1 more computer.
Check with the vendor,
Larry
I use this one Joe, works great. Only 39.00 dollars.
Gearify Software
Larry
Hi Joe,
I was looking at these products, but for metal only.
https://www.3dfablight.com/
Larry
I made one for a gravesite, might get you started.
Had to .zip archer outline.dxf
Larry
What anti-virus are you using?
Check this post, might be some help.
https://www.plasmaspider.com/viewtopic.php?f=73&t=23293
Larry
I used to have the same machine, check the thrust ball bearing on the Y Axis bracket, make
sure that isn't the cause of the backlash.
Just a thought.
Larry
I noticed you made a prototype using some formable material.
I was a member of TechShop Detroit before they closed.
They had a scanner, which would be useful, and then import to your Cad program....
<<<<< It's a knife handle, I made the faces in fusion 360 but that program is very weak and illogical when it comes to sculpting>>>>>>
I would start over, after viewing some videos to learn how to...
Just a thought, don't know the table size, but one of these
might help you out....
[QUOTE=deadlykitten;2278870]hi :) 88 ? do you have a photo/ link with that machine ?
Looked for an 88, and found a 130.
https://www.youtube.com/watch?v=OnNP1kt8Dhg
I have very limited knowledge in SheetCam, I can usually drill and tap
and finish a part.
I would like to speed things up by having the drill bit rapid travel in
the Z axis to just above the...
Hi Andrei,
Forgot to mention, used a radius cutter on the gibs,
ball mill on the table.
Larry
If you have the mill apart, drill and tap some extra holes to mount
knurled knobs to trip limit switches.
I did the CNC conversion, oil gun works O.K., not much room
to use tubing and fittings on...
I drilled and tapped some 6mm holes, added 6mm grease fittings, and used an oil gun.
Drill through the gib, and mill a channel.
Looks like a floppy connector and cable in the upper left of the
center photo.
This is the one I'm thinking of buying, hopefully you are talking about 1.5mm stainless, and not 1.5".
https://www.3dfablight.com/
Larry
The description on the tips indicate "some stainless steels", check that out.
The flame cutting doesn't help either.
Larry
Would this work?
https://www.amazon.com/uxcell-Stainless-Coupling-Coupler-Silver/dp/B06XL1K271/ref=sr_1_20?ie=UTF8&qid=1537983051&sr=8-20&keywords=8mm+coupling
Larry
In the Detroit, MI area the quotes I received were for 2 heights and 3 different conditions.
The shipping containers are offered as:
Wind and water tight, used
Cargo worthy used but structurally...