I Believe the 24R uses a ECM Board and it uses the enable signals.
See Schematics.. https://github.com/tormach/Repair-Information/tree/main/Schematics/PN%2037509%20-%20ECM1%20Control%20Board
...
Type: Posts; User: Contract_Pilot
I Believe the 24R uses a ECM Board and it uses the enable signals.
See Schematics.. https://github.com/tormach/Repair-Information/tree/main/Schematics/PN%2037509%20-%20ECM1%20Control%20Board
...
Relay is easy to replace I believe it is Relay K4 part # srudh-sh-112d1 and only a couple bucks, just use a good desoldering iron and soldering iron and good flux made for electronics.
Schematic...
Nice thing is that Tormach has released the schematics for the ATC Board on their github. It is a really simple board prob a simple fix if you have basic electronics diagnostics skills.
...
I dumped the firmware to the missing power drawbar controller. (Tormcah Permission to Post Public they will be adding it to their git hub soon) I also received a package from Tormach I have not...
Yea hope they complete the repo.
Since Tormach made it Public they supported Right to Repair and Subsequent call out video they have Released most all their schematics and firmware files.
Tormach's Github is at...
Caps in the PSU... I have fixed a few of them.
Here is my Tear-down and Repair Of A Tormach Drive and Compare it to $50.00 china import.
Yes, You can Use Any IRF540 On the market. I have a rail of them left think.
I just use the right tools..
http://www.stevenrhine.com/wp-content/uploads/2018/01/722EBC76-3B7E-4B5F-9237-76ABC8BD7F94-1024x768.jpeg
Still have not connected B1 & B3 due to deciphering language... but Changing Hitachi P055 Pulse Train Freq. Scale from Default 25 to around 2.9 gets me very active spindle movement wi change of...
I have some spindle control now thanks rdsi.. just a small window about 5HZ will have to dive deeper in to the settings thanks a bunch. Got the ProDriveNext Software up and going now also.
rdsi thank you, thank you, this may help a whole bunch. I will check it out. Hope I can translate it to the WJ200.
Full Re-Retrofit On My Blog...
I Somehow Obtained a Actual Tormach Lathe BOB for My Retrofit... ...
Just Dawned on me the A50 is the band Saw maybe the 50 is the bandsaw?
the 50?? 8" X 4.8" X 5.125" ??? small machine.
Order Placed.... Cannot wait to play.
Looks like the page changed to coming soon.
This Popped up on a google saved search....
https://www.tormach.com/pathpilot2-0.html
Rumors started last week that it would be released in a week...
I No Longer need the 5i25 or 6i25's
Just spoke with Tormach tech support. They said no state secret! PP 2.0 should be public in a couple weeks...
Listed it on Fee-bay PM me if interested in it for a little less buying it from me off of ebay.
https://www.ebay.com/itm/182883870932
Listed it on Fee-bay PM me if interested in it for a little less buying it from me off of ebay.
https://www.ebay.com/itm/182883924648
Listed it on Fee-bay PM me if interested in it for a little less buying it from me off of ebay.
https://www.ebay.com/itm/182884115480
I have some Spare New never used Mesa Cards. I Was going to use for a mill conversion but scrapped them plans when I got a Tormach. I am Still running another 7I76 on my lathe so I need another 5I25...
kstrauss, no one is willing to say I guess! I would assume Debian Debian 7.0 Wheezy because that is what the current version of LCNC uses.
But there is also Debian 8.0 Jessie is from 2015 and...
I have had mine working for some time....
https://youtu.be/n0YpBLKKRyQ
Anyone Beta Testing PP 2.0 Yet?
Any info on it?
or is Tormach making you keep it a secret?
Still no chips... ugghhh!! 85% done with the shop.
Now winter is coming got the shop heater installed. 1 More small wall and will be done with that part then Benches & Shelving.
...
Trusty Cook.... They make them for Snap-on.