Thanks.
Type: Posts; User: CutOnce
I will check that one out, thanks. Why is it critical to maintain +/- 0.01" with a CNC when the plasma cutter is traditionally hand-held?
So in other words, nobody has done it. Could under-water cutting prevent the need for THC by preventing warping? Thoughts?
I am not interested in sales talks at this time. I want to discuss what cncZone users know.
I'm having trouble finding a THC add-on for an Arduino GRBL v1.1 system. Ideas appreciated.
Job taken, thanks!
So I decided to add a hex to the design and a second variation to the order. The hex means it now requires the next size larger rod. (1.25" rod.)
I have made an IGES and STEP file for each....
I am looking for a quote to make one of these from 316L. The top thread is metric 22 and the bottom thread is american 7/8. It would be great of you had a set of nuts to verify the thread when...
So I read about Mach4 and I think this is what I am really after. A GoTorch system that uses Mach4 software. Is this coming?
Recycling garnet is possible. Much of it never hits the material.
What does the community suggest a XY Gantry for a 2'x2' waterjet like a Wazer? This is a branch of the discussion:...
I'll trust your math, but for hobby, the math looks attractive. Imagine that same simple part. It takes 2 weeks to get the first prototype cut and shipped to me from a machine shop. The part has a...
He doesn't pierce because the sand would spray in his face if he did. What kind of control software and gantry is recommended to a hobbyist wanting to do this?
Boo-ya baby! Cutting 1/16" aluminum with a $150 pressure washer at 2" per minute.
https://www.youtube.com/watch?v=Lg__B6Ca3jc
Thanks, I will check out the bullet system.
bump...
I am needing a cnc plasma cutter about 2'x2' for cutting 16ga. I found GoTorch, but it does not seem to work on Windows10 or any modern computer. I tried to contact them with 2 questions and they...
You stopped in to call my wrong. Care to elaborate?
I guess not. That's kinda surprising. I know 6K psi would cut slower than 60K psi, but it would work. Heck, the Grand Canyon was cut with almost 0 PSI. I have a feeling Wazer runs on a standard...
Many thanks to ChrisW for jumping on this and making it happen so fast! Here's the pic he sent:
https://www.dropbox.com/s/xx3yor5rtmxz41w/taper%20tool%20done.jpg?dl=1
Yea it should work great, I would just clean with acetone very well. Be careful about getting it in the slots, powder coating adds thickness everywhere it goes.
Does the DIY hobby world have a kit for making something like the Wazer? It seems a quality pressure washer and a replacement mixing nozzle from a professional waterjet could do great things.
...
I need a chunk of steel shaft with a hole down the middle. It's a tool. It's designed to put a slight taper on a piece of metal conduit pipe when it's hammered inside. The outside of the tool does...