Search:

Maybe it is a bad Acorn board, I doubt but I do have another new one.
Going to change it out this evening. I can trip the limit switches by hand and CNC12 says limit switch tripped and then limit...

Well that did not work any better. I can use one of there programs any it runs the program perfect but without the servos turning.

Yes I have the filters three of them as per the DMM wiring, and three 1 amp fuses. These are all DYN4 drives. I just rewired all drives to number 3 photo. Going now to try it.

And did save pulse...

I never did bench test with the acorn, did not have the 24v and 5 v transformer. That just came in Saturday.The servos are locked just like there waiting a command. has me stumped. The Acorn board is...

Yes bench tested them with the DMM software. then installed the Acorn in the cabinet and wired them as per photo number 2. with 24V and 5V. going to try the other diagrams now and see what happens.

cannot get the drives to move in CNC12. they work fine in the DMM software setup. Was looking today and found three different wiring for the same drive (WHAT GIVES). when i move the X, Y or Z either...

Well Centroid did not send me here. Im on here over 10 years .Since I like to play with CNC machines in my free time, I did follow your post on the acorn forums. What did I get out of your posts? Not...

What are the motor numbers? Did you cut the shaft smaller on one of the motors?

Just got a Haas tl2 when I input the tool and workpeice values, it says greater than 142 if you say yes twice it will input the right values.
Just trying to find out what is 142?
Thanks.

Anything you do in Artcam express you can do with gerber artpath. For doing anything 3d you need Artcam pro or enroute 4.

If you purchase a Gerber sabre and want to do cabinets you need ENROUTE by SAI. If you look on e-bay you sometimes you can find it. You need the pro setup and it will be extra for the cabinet setup....

Found the problem, was a bad e-stop switch. Bad switch gives a Z axis error.

Went to power up the unit this evening after we moved it today in the shop. It comes up with a Z axis encoder-motor problem. Worked fine this morning, I checked the cable from the encoder to the...

You will be really pleased with the Sabre, I have a 408 with the tool changer. I run gerber software with Artpath and 3D auto carve. Also runs great on Enroute which is also 3D. If you have any...

SOLD

Yes you are right I can get the Millwrite for the Pc for free. It just grinds me that they run a company like that. They operate out of the old State police barracks in Milesburg, Pa. which is about...

Am I the only one who has ever been screwed or are there others out there??

As the story goes, I have a centroid M39 which is 3 years old. It was purchased with Millwrite engraving as one of there...

Any top name cutter will do you justice, try to stay away from the 199.99 new cutters on the net. If they (No when they) break you will never get a part. Find a gerber P2c great machine.

You have...

Thanks to all of you, I did get it with the G176 code. Tried to get the g79 but would not work. Thanks again to all.

I have a Boss 9 , I am trying to cut a 1' hole in 3/8" plate with a 3/8 endmill. Tried my hand at g-code and it don't look pretty in fact it does not work. Can anyone write a simple g-code to cut a...

sold

I have for sale a nice Gerber Demension 200E CNC router. It has the optional engraving head, and an additional spare router motor. I have all the book and manuals for it. It also includes the...

In fact I am selling one thing on e-bay now http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=018&sspagename=STRK%3AMESE%3AIT&viewitem=&item=280115088783&rd=1&rd=1
I ALWAYS put my number in I have...

When someone sells these things, you would think they would give you the name of the people they sold them to. ??

I gave him a call about a week a go. I said I was going to Eastec and would be in his area. I wanted to drop by and take a look at his machines. NO machines he said he just sold everyone. I asked hin...

It is the show of shows, They need a lot of space and they have it there. You need two days to see everything.

Thanks Todd

Steppers are great if you want to cut something where the tolerance does not matter. They are old school. bite the bullet and go Servo.

Upgrade the software, Had the same problem with Advantage 4.1. went to Omega and that cured it.

Check Out www.worldlasers.com There prices posted can still be a better deal. I got a 36X24 60Watts There price posted I believe is 16,500.00 went there to look at them and offered 9200.00 cash...