Thanks guys for a great source of information much appreciated.
Been testing the +/- 10V analog output from the dspmc controller with an oscilloscope.
The dspmc only seams to work properly if...
Type: Posts; User: habituralcnc
Thanks guys for a great source of information much appreciated.
Been testing the +/- 10V analog output from the dspmc controller with an oscilloscope.
The dspmc only seams to work properly if...
Hi,
Thanks again for your time
don't want to start any dispute, but are you guys saying the same thing or do you have different opinions?
To: Al_The Man,
yes if you can post the...
you don't need to add an encoder to dmm 1.8KW servo (if dyn4) as the drive has incremental encoder feedback that you can connect to an encoder input on your controller.
I think you other questions...
re,mactech54
So i suppose the question is then is the dspmc at the earth ground potential i suspect it maybe, as it uses
earth ground and com- to filter noise from signals ??
To make matters possibly more complicated i have three ip66 steel
electoral enclosures.
One for dirty ac service power, breakers, power supplys,
line reactors,
second enclosure houses 4 dmm...
hello,
Thank Al_the_Man and mactec54 for taking the time to reply
but im still confused.
dam didn't realise my attachment got compressed
the best i can do then is provide a link to my other...
hello everyone,
first post so go easy:)
Trying to work out the right way to earth dyn4 servo system with a dspmc controller
still confused if i need to bond the dc common buss to earth ground...