I'm looking for the KIA programming and Operation Manual for a 21LMS with a Mitsubishi 520L control
Primarily looking for all the M and G codes
and instruction to program and Operate
C axis, Live...
Type: Posts; User: vpcnc
I'm looking for the KIA programming and Operation Manual for a 21LMS with a Mitsubishi 520L control
Primarily looking for all the M and G codes
and instruction to program and Operate
C axis, Live...
Since this seems to be the Most relavent thread..
I'm looking for a more recent PLC Update for a Fadal with the Freedom NC200 control..
It can be found in the following Folder of the control....
an Old CNC with a Fanuc 0M A series control doe not have the block Processing speed to do mold work.
Even with Drip Feed and the fastest Baud rate ( 9600 by the Book, or 19200 with a trick ) is too...
This is a Call to All the CNC Technicians and Mechanics out there.
Question:
When adjusting the Levelers on a CNC Machine,
Is it acceptable to use a high power pneumatic Impact wrench on the...
I have a client with a 1987 Feeler FCNC-100 Lathe with Meldas L0A control.
The battery has drained and lost all Parameters.
No Hard copy can be found in the documentation supplied with the machine....
:9020(TOOL CHANGE)
#101=#1032
#101=#101/256
G0G40G80
G91G30Z0M19T#20
IF[#101EQ#20]GOTO100
M20
M6
N100G90
M99
I think they are similar to this type of encoder.
http://www.usdigital.com/products/encoders/incremental/rotary/shaft/sp-16/
The 0iMD is Fanucs Lastest addition to it's Lowcost control product line.
It is enhanced with new features over the previous 0iMC product.
...
Still Watching this thread to see where it goes..
No new news....
I was hoping to see the final reply if all worked out on this one.
Just my 2 Cents...
Check with Fanuc before you hook up a RPC...
If it's a Brand New Machine, chances are Fanuc will not cover any warranty issues when using a RPC...
I've run into a few issues...
I'll experiment with your sample code and see what I can come up with.
If I get it working, I'll post the finished code.
Thanks, this might just be the missing info I need.
Not looking to read the future...
The Chain to be Cut has already been selected on the CAD side.
I'd like the Script to read the X and Y of the start point of the First Entity of the Chain. ...
I have a Simpl Drilling Demo Video for BCC V21 that I just completed.
It's a 9MB WMV file.
If you leave your E-mail address, and can reeceive a 9MB attachment, I'll send it to you and you can...
I've posted this in the BCC Forums. Thought someone here might help as well.
I'm trying to make an Edit to the Way the Tool Change Macro Outputs the First X and Y position. In the Default Macro,...
Here is one of the reasons that Fanuc, Mitsubishi, and Other Control Manufactures do not Warranty their electronics when run on a Phase Converter.
Currently the Digital Phase Converter is the...
I'm going to experiment with using M198 to DNC from a FTP server.
Does anyone have prior experience doing this?
21i and 18i series control connected via Ethernet to a FTP server.
I/O = 9...
Yes that is correct.
There are two ways to DNC from a Memory card.
the M198 method is the prefered method as it will work regardless of the Macinetool builder features.
IF the machine tool...
Versa
On the standard 6M control there was ONE set of Offsets 01 to 99
The same offset data was used for Both, tool Lengths, and tool Radius
If your tool changer has 20 tools, use offset...
For a Nominal Fee, I can convert your Paper Tape to a PC friendly File and also supply a print out of the data.
PM me for more info.
Turn off the control.
Hold the Keys with the letter P and the CAN on them.
Turn the control on. Wait for the screen Display, then release the P and CAN keys.
Home the Machine.
If this doesn't...
Corner rounding / chamfering is an option.
If you have it you can just add an R or C to a G01 event for a radius or a chamfer.
Some controls need ,R or ,C
G00 X0 Y0
G01 Z-.25 F10.
G01...
To do DNC from a Memory Card you need I/O set to 4
You also must have User Macro B option
You create a Main Program that uses a M198 Pxxxx subprogram call
M198 will then look for the program...
As a Teacher for both CNC programming and also Machine Setup and Operation, this is the Basic Outline I provide to Companys looking to have an Employee Trained.
Must already have good general...
Sounds like the Parameters are still not fully loaded.
Sometimes during Loading you will get an alarm 000 Power off..
You have to Ignore this alarm and then Relaod the Parameters Again.
The...
I'm not up to date on the Current Haas 15,000 rpm spindles.
On the First Machine I had experience with, It had no Torque at 15,000.
I could stall a 1/8 drill in Aluminum.
That machine also had...
Here is an Excel Document that I put together.
I hope some of you will find the information helpfull.
Depending on What Work Offset Option you have.
G54-G59
The Extended 48
or the Extended...
I wanted to clarify something that was posted a few posts back.
For as long as I've worked with Fanuc controls (some 23 years) I've never known anything to be "STANDARD"
Every Control that I've had...
On the Setting Screen there is a setting for Program Format.
Convert or Don't Convert.
This is how you switch from 6T and 3T formats.
The two formats fall into
6, 10, 11, 12, 15, 18, 21,...
The Most Important thing I can Add is this.
You should Always USE CAPITAL letter for your G Code programming, Unless you are working on a control that specifically uses Lower case.
Bet even...