Set the rotary switch to "F"
Type: Posts; User: DHYSTA
Set the rotary switch to "F"
Hi jdeantx..
How did you solve this problem ? My machine is having same problem now..
Please share the solution
Thanks.
Hi..
I need to decompile macro program downloaded from Flash ROM, edit the macro program and reload it back onto Flash ROM.
How can I do that?
Thanks in advance
Dhysta
DHYSTA 02:53 PM Today
Finally DNC transfer is back to normal after replacing PC serial card..
Finally DNC transfer is back to normal after replacing PC serial card..
Hi DJ..
I'm not using sub program while drip feeding or macro calls..
Okay, i will check pc setings..
Thanks a lot
Hi, did you find the problem? I got the same problem now. Please advice the solution..
Thanks before..
Did you find the problem? I'm having the same problem ps128 while dnc. Please advice..
Thx
Hi Fordav..
Can you tell how in 15tf to save system parameter and mtf parameter after inputing ? I'had initialized the fapt memory beforehand. It's confusing to me as the language is japanese.....
Hello motordude..
I believe you have got your 4th axis running. Can you share additional parts, connection and tuned parameters as I plan to add one on my doosan.
Thanks a lot..
Hi Arminmen, finally how did you solve the problem ? I'm having the same problem on Tape Cut W0 with Fanuc 0 B.
If your machine's servo drive is 3-axis drive, get one for replacement.. also check alarm history screen, there may be another alarm occured momentarily just before 401..
May be it's only path name setting problem. AFAIK parameter 3141 to 3147 represent first to seventh character for path name. example: 3141 for H, 3142 for E, 3143 for A, 3144 for D and 3145 for 1....
Dear all,
I'm having trouble with my machine Wasino WMC-3 with Fanuc 0 MC. Its PMC program is not working and cannot be recognized while booting.
If any of you have the same type of machine, i...
no there isn't a TAPE mode selector. the activation address for DNC is there in its ladder program (G127 bit 5), but relay/switches which can turn on the address are difficult to find. It ends with...
Dear All,
I'm working on CNC Mill, Cincinnati FV750 wit Fanuc 0 M with no manual. I heard this machine can drip feed from PC but I can't find any DNC or REMOTE button on the operator's panel.
Can...
The parameter remained unchanged when i powered up..
I changed prmtr 9921#7, then alarm 'POWER MUST BE OFF' appeared. Then I tried to punch the nc parameter to PC, change 9921#7 to 1, and upload back to machine. the bit stayed 0.. and again alarm...
Thanks guys for your replies.. but I had tried to set it with PWE on, MDI mode on and edit key enabled. May be M-man's right, arent there passwords used on 16,18,21 ?
Recently I want to add repetitive cycle function on my Fanuc 21TA. I changed the option parameter but the bit stayyed '0'. Could anybody tell me why? or is there any special procedure to do this..?...
Thank you Dan..
I'll recheck everything according to your complete explaination. May be I missed something.
Dear all,
Can anybody tell me how to solve alarm 001 (TH alarm) while my Fanuc 0 MC is drip feeding from PC? Manual says something related to unknown character on the tape, but i'm sure nothing's...
Hi All..
Currently i'm having a problem on Makino FDX-125 with Fanuc 0MC. The memory is cleared because of batery problem. Now i need to re-enter everything in the RAM, but having no data. Does...