John, After the adjust the magazine is virtually silent. Ours was noisy before. Don
Type: Posts; User: dblais
John, After the adjust the magazine is virtually silent. Ours was noisy before. Don
We have had a problem with our machine breaking grippers for our Cat 40 tools. The remedy is to adjust the magazine chain tensioner. Loosen the 3 hex bolts under the rear sprocket where the tools are...
Advise to re-install tool offset parameters into a T1/Slant Turn 40 Lathe. We can view the page to put in the offset but the machine goes to absolute value. Thanks in advance dblais
I have a SMT CNC Lathe. The machine was retrofitted with a General Numerics control about the mid-80s'. The machine can be had for the Rigging cost to remove it. It also has an Extra Turret. We...
Thanks for the responses. We have a Quick Turn 28N to be done first. I plan to all the others as a PM. We have just rebuilt the tailstock on the QT and found the fittings to be plugged with a waxy...
Are there generic Fittings for Mazak turning centers for lube oil distribution. I cannot find skematics for the fitting locations on Mazaks. Thanks
We use CCI Suite Factory. It includes the operating system w/ protocalls for the individual turning and milling centers. Our system is divided between CNC Milling programs using Smartcam. Milling can...
I am a New Member. My first Thread. I need a Source for the locations of the Lube orfices on a Mazak Quick Turn 28. Thanks