are you interested in selling it?
Type: Posts; User: am64
are you interested in selling it?
Did any one find operating manual for BOY 15????
I have a BOY 15 injection molding machine that need need a lot of work to bring it back to life. Does any one have access to technical manual for this machine? One more thing, what is the...
Both file formats do the same.
I am pulling my hair out trying to figure out why I am having this problem.
I import a STL file, sew, set CS (G54), enter few operation and run simulation without any issues. I change / add a...
Update. I ran the program with ToolPath View off as instructed by Tormach. This time I did not encounter the problem. Z-axis moved to tool change positon as porgrammed. I am going to run it one...
Yes I did Ref ALL before running. I did contact Tormach today and they are aware of this issue / Mach3 bug. Every thing works great until the program needs to change the tool. The spindle stops,...
i have been using my new 1100 for few weeks without any issue. But today when I ran a new project it started just fine until the first tool cycle was complete. My code calls for M998 go to tool...
Oh, the pinout for 1100 is (on my machine):
1) 5V DC it is at 12 o'clock position (use machine body for negative)
2) Not used it is at 9 o'clock position
3) 12v DC it is at 6 o'clock position (use...
Thanks for the reply. Here is what I found so far. On Mach3 as I go to z-axis prob tab and start the z-axis move downwards with a step setting on 0.005. The z-axis cont. to move down at .005...
I am working on a project that uses the z-axis to push a rod into a device. I am planning to install a micro switch so when the z-axis reaches a predetermined point it will close the micro switch...