Thanks for the response - I would expect that there should be a groove in the plastic mount for the bearing that would be exposed when the bearing is pushed further into the block, but if the...
Type: Posts; User: Donjohnson24
Thanks for the response - I would expect that there should be a groove in the plastic mount for the bearing that would be exposed when the bearing is pushed further into the block, but if the...
I have the same problem and was considering Loctite, but like the snap ring solution.
However, you mention THE snap ring as though it is part of the kit - which I don't see in mine.
Are you...
I should have been clearer:
The double probing sequence G21G91G38.2Z-30F100; G0Z1; G38.2Z-2F10 is the default in Candle Settings/Probing commands, and I just showed the commands I ADDED on the end....
Thanks for your prompt reply.
I do have the double probing commands in front of the G10L20P0Z19.1;G91G21G0Z10 sequence in the Candle parameters
and re-trying the system I DO get what appears to be...
I have a CNC3 3018 Pro CNC machine, which I am getting to grips with slowly.
I have purchased a Z Probe device, which has a height of 19.1 mm, and connected it so that I see the appropriate actions...