Search:

order does not matter
one of the 8 legs must be met for the G116.1 to be on

Post image entirely.
looks like D499.7 and X6.0 activates G116.1 but the picture is not complete

More details, what function you use?

I think it is possible using G08.6 (reset and rewind signal) and F0.0 (rewind signal) in PMC and parameter 3001#2 set to 1

param. 3290 #1

0064#5 When an alarm is issued or an operator message is entered, the screen display
switches/does not switch to the alarm screen or message screen

What is x 8.5? is 0 and should be 1
"It is right that i add 2000 for the diagnostic parameters to check everything (like R955.2 => Parameter 2955.2)?" NO

in pic. 1 alarm 1001 appear when R0000.4 is on (1)
R0000.4 is on (1) when K000.3 is off (0) and R0001.0 is off (0) ,and will stay on if K000.3 is off (0) and R000.4 is on (1) and X008.2 is off...

in post #11 in the first picture taken at 21:04:14 not shown any alarm at the 2nd picture taken on 21:04:32 alarm 1001 and EMG occurs,that's why I think alarm 1001 is what causes EMG.

fordav11 I do not think that has to do with reloading parameters (I saw in photos 2 and 3 the run time and part count is different from zero and parameter 1815 and 1816 is set)
for EMG alarm Did...

Issue #2
use G30P2U0W0 after you sett param. 1241
G30P3U0W0 set param. 1242
G30P4U0W0 set param. 1243

Issue #1
Why convert inches into mm [#5021*25.4] ?
#5021 1st axis current position...

I posted an example in attachment

Sorry, you're right it's Sub51(Window data read)
PMC can read with Sub51(WINDR) and write with Sub52(WINDW) macro variables,parameter,seting data etc.

I think you can, but you need to make some changes in PMC
1.
uses variables #1000=1 (F054.0 in PMC) in the program to enable K8.2
You must add at PMC


F54.0 K8.2...

param 40#5 =0 T code as a normal tool function
=1 T code calling subprogram O9000

param 11#5
1 : Machine is stopped in single block skip by macro command.
0 : Machine is not...

Press the e-stop button in.
1.Press the PARM key- go to parameter 900 and enter parameters 900 through 917. A "000" alarm appears after entering the first parameter. Just go back to parameters and...

1. What type of PMC ?
2. How is decoded the rest of M codes?
3. Search for G4.3 in the ladder and add there R2100.0 and 2100.1 for MFIN.Is not a good idea to have g4.3 2 times in the ladder
Excuse...

This causes to start machining before the spindle has reached it's programmed speed.

3708#0
the spindle speed arrival signal (SAR) is:
0 not cheked
1 cheked

3715#0
This parameter...

I think the problem is X0.5 , maybe is remain blocked
check in diagnostig page for x0.5 it should be 0

which element is not iluminate in line S076 (X8.6; R602.7; X0.5; F149.1)
What is X0.5

try with *.nc
or open any folders go to Tools >>Folder options>>View>> and uncheck Hide extensions for known file types, and rename the file without any extension

Param. 3201 bit 2

PM me your email I will send some GFZ-6352x ,GFZ-6353x , -636xx manuals.

MDI
M3 S100
pressing star
command is executed
spidnel is working on
then clears the command screen
without pressing reset key
is supposed to be so?
YES

push RESET Key to deleted MDI command from the screen
for more details post program here

For XP open any folders go to TOOLS >> FOLDER OPTIONS >> VIEW >> uncheck "hide extensions for known file types"

Go to message screan and see what alarm appears

increase and decrease number of elements when edit ladder

""When using the measurement functions, each machine tool builder
needs to perform customization as described below. This
customization work is required even when the FANUC standard
measurement...

this may help