I'd advise you to skip Weike if you want(need) after sales service. Ridiculously poor. Unless you are Tech savvy with Chinese machines, you'd definitely be better off going with a US supported...
Type: Posts; User: Dubliner
I'd advise you to skip Weike if you want(need) after sales service. Ridiculously poor. Unless you are Tech savvy with Chinese machines, you'd definitely be better off going with a US supported...
All that money, and you still have to change the tools by hand :). That's a thing of beauty, somebody else said it, but that's better than reality TV.
I recently saw a Tormach with ATC and was quite impressed until I started researching them. I found a machinists site which will remain nameless but as they all seem to own high dollar machines and...
Yes quite surprising. I would have thought the serious laser guys were on here. The machinists certainly are. Now that I've gotten a faster computer to run the laser, I'm seeing how terrible Lasercut...
Just a theory, but can you save and open the file in text format and estimate where the error happened,possibly identifying an x,y co-ordinate that correlates to where you stopped, then cut all the...
I wanted to take a moment to recognize the excellent customer service of Ray Scott owner, engineer and sweeper upper at Rabbit USA. He spent an unusual amount of his time in about a dozen emails to...
OK, figured it out. Draw a vector around lettering/art, select all, select grade engrave, away you go! Similar to an area clear using an inner and outer vector in cnc router terms. I am getting what...
I always knew what it meant to grade engrave, but realized when I went to try it today I didn't know how to set it up. How do you draw the art to engrave outside the letters instead? TIA dubliner
"its a 9060 100w machine actually. tx Dubliner " Thanks for your very prompt response Lucy. Good customer service from Weike. I am also in touch with Andy and have sent him the appropriate...
Im afraid my sales person may no longer be around, his company is not. Talltech Lasers. What do I need to identify the risght software, and its a 9060 100w machine actually. tx Dubliner
I installed the discs on an older laptop to run my Weike 9040, but want to use a new laptop now and cant find the discs. I have the soft dog/dongle, can I download them from anywhere? thanks Dubliner
That is quite amusing, I believe the police would have a field day with a threat like that, are they 18 year olds for Gods sake?
Moving a laser about 12 miles
I have a Weike 600x900 with a Reci 100 watt tube in it. I have to move it about 12 miles to a new shop. What precautions should I take apart from the obvious. Should I...
Wouldnt a cracked lens exhibit itself everywhere though? I was cutting 6 parts out of a 36x24 sheet at a time. Only the one closest to the control panel had the ghost. I shall do some test cuts and...
I'm cutting .25 acrylic and getting this "ghost image" on the side of the table diagonally opposite to mirror 2, It does not affect the cut, but the ghost is just powerful enough to brown an image on...
You know I wondered about doing an offset and trying that. I was wondering if it would select the inner circle and engrave the whole thing, but my experiment with the adjoining squares made me think...
Im trying to raster engrave a circle but I only want to engrave the line, not fill in the circle. I'm using Corel x5 and Lasercut 5.3
I rastered 2 intersecting squares and it cut into the inside of...
Hey guys - cutting is going well, but in one spot the cut went over some acrylic I was using as spacers under the sheet and the liquid acrylic seeped a littl bak onto the part, is there any way to...
I have to cut & raster engrave a few samples for a client. What would the recommended S&P be on a 100w co2 in 3/16 Acrylic for cutting and for rastering a small logo/trademark in the corner? TIA...
Zax, would you have any pictures of a combiner installed and would you just run the file or outline depending on your needs with the door open to disable the CO2, and thirdly, arethe visible & co2...
Thats what I was afraid of, unfortunately this is a small part similar to a gasket and .125 in wide in some places, so Tweakie, can you share, bits feeds & speeds and hold down for a 3in x 3in...
A search gave me hundreds of CNC related solutions, but can you cut .25 in HDPE with 100w cutter?
Whats the max file size in Lasercut 5.3. I have a file that is 8319488 bytes, and it seems to time out even though it says 100% downloaded? any ideas? TIA
Is that in Design SW or Lasercut? I'm using Aspire ( primarily a 3D CNC package, but can output a dxf ) but am trying to familiarize myself with Corel ( I have X4).
3 on left engraved with different power /speed to see results, 4th rastered. Sorry for the flash.
OK forgive me if I misstate some things, but I was wondering if you could select only the lines when you raster engrave & not the spaces between the lines ( or is that called engraving on low power )...
I bought a used Regen FPZ that sat for a number of years. Got it all hooked up seemed to run fine but when I was surfacing Trupan board today I heard a nit of a klunk and the contactor opened on the...
I'll have to drink my way in. Now theres a challenge for an Irishman :-). OK I will never complain about the cold again.
Name the Pub Al, that was it. Yah bloody hooo!! Now I can pipe up that bad boy! thanks a million.
So does the main blue wire(presently connected to #2 change to #4 or does the jumper change? Do you have Skype by chance or a number I could call? I'll be standing you a good Irish whiskey at your...