I tried to run a new program which calls up tool 8 (havent called it up before in a program, section is pasted below), and the turret just spins. I tried resetting and powering off and on and cant...
Type: Posts; User: 78sharpshooter
I tried to run a new program which calls up tool 8 (havent called it up before in a program, section is pasted below), and the turret just spins. I tried resetting and powering off and on and cant...
Recently acquired a Hwacheon Lathe with 0T-C controller (first cnc lathe), and I use Fusion 360 for all of my CAM for milling and wanted to continue using it for turning. I would like to use a USB to...
I just got a 1998 5BVK cnc mill with glentek 4040 and 4050 servos. Called glentek and now have the pinout (these were custom builds for fagor controls) and I am ready to retrofit to linuxcnc (I have...
Picked up a series 1 CNC serial 99X so I guessing a 2 or 3. Was retrofitted perhaps in the mid 90's with an AH-HA system, power drawbar, elaborate filter and cooling system for the coolant. From...
Got the Teco (had to get the 20hp unit because the 15hp and 10hp were backordered for 2 months but I got a great price on the 20HP). Hooked it up and ran the auto-tune feature after putting in the...
I dont have clamp meter and tried a dozen more times to get it to work, mostly changing the PD120. I came to the conclusion that either the unit is defective or it has the internals of a 3HP unit...
I am posting here as a last resort for trying to get this VFD to work as expected and have read through and watched videos on everything I could find related to these VFD's. I have 240V 60hz single...
I have a millrite and use it for hobby stuff only and really like the idea of being able to have a whole new world of capability if I retrofit it. I found the 3 axis, NEMA 34 Servo kit for $1150,...
I have found typical 3 axis kits with NEMA 34 600 or so oz steppers. I want to conver the X and Y to rolled ball screws (I am poor) but it would be too difficult to do it for the Z (because of the...