Yes it is, and it is quite easy to set up. I used a VFD to power my motor and had a high wattage brake resistor that could stop the spindle in about 1.5 seconds. With the added resistance of tapping...
Type: Posts; User: tightmopedman9
Yes it is, and it is quite easy to set up. I used a VFD to power my motor and had a high wattage brake resistor that could stop the spindle in about 1.5 seconds. With the added resistance of tapping...
If I could run the servo at 5,000RPM then I would only need a 1.3 gear reduction. Without any official recommendation about this though I'd be concerned about killing the motor. Would the issue just...
I recently moved my shop from an industrial space to my home garage and in order to fit my Bridgeport Boss II R2E4 mill into the garage I had to take the head off. With the head off, I thought it...
I retrofitted my mill to Linux and I have all the old parts leftover from the original machine. There was a problem with the driver boards which would cause an intermittent fault, I'm not sure what...