504,012 active members
4,380 visitors online
Register for free
Login

Search:

Type: Posts; User: gbman7a

Search: Search took 0.00 seconds.

  1. Re: Tuning Servos trying to determine what info is relevant

    HI Tom, we determined that the machine operates at 5081 counts per inch traveled on the x axis.

    We took an image of the filter screen but no filters have been applied.
  2. Re: Tuning Servos trying to determine what info is relevant

    I read the post/ thread that you suggested. I have a fairly good understanding of what p i and d do. I don't have a full grasp on how the output settings and error settings impact p but i will reread...
  3. Re: Tuning Servos trying to determine what info is relevant

    Hi Tom,
    Thank you for the quick response. The machine is a 1992 MotionMaster 3 axis router. It has Glentek GA370 servo amplifiers. The servos are Baldor MTE 4090 BLBCE. The machine has Tachs...
  4. Tuning Servos trying to determine what info is relevant

    I think I'm on the right track. This is the highest I've managed to get my p (2.4) value and when I make a move of 4000 the graph looks good. When I make a move of up to 40,000 it looks like the...
  5. Re: Can Kanalog be used as a source vs sinking for relays.

    I appreciate the info. The relays are idec ry4s-u they draw 37.5 ma. The Glenteks are ga370-3. The relays are normally closed and the lockouts are grounded/ the drives disabled. When powered the...
  6. Can Kanalog be used as a source vs sinking for relays.

    We're retrofitting a Motion Master that had Fagor 8050 controls. The old system sourced the relays, I'd like to source the relays using Kanalog to include the relay that enables the Glentek drivers....
Results 1 to 6 of 6