Hello,
I should have said that differently,
I know all controllers have their issues, and I love Mach3.
I had a UCCNC Controller spare, and available, and it was "the cheaper option" for me to...
Type: Posts; User: innovativeiron
Hello,
I should have said that differently,
I know all controllers have their issues, and I love Mach3.
I had a UCCNC Controller spare, and available, and it was "the cheaper option" for me to...
Thank you very much for this information.
Regarding the machine, all I know is that it was running on Mach 3 software. The serial number was not legible as it was somewhat weather beaten when I got...
Hello,
I acquired a Tormach PCCNC 1100 a year ago, it is an older model, dated 2008, but was never used until last year, running on MACH3. The machine was working, but I decided to upgrade the...
Hello,
I am doing a control system retrofit on my MV-40B
I am located in Trinidad in the Caribbean, and the control system got water damage in shipping.
I have changed all the servomotors and...
Hello,
I am doing a control system retrofit on my MV-40B
I am located in Trinidad in the Caribbean, and the control system got water damage in shipping.
I have changed all the servomotors and...
Hello
I bought the machine in an auction a few years ago.
It was in a good working condition, but I had it in storage for a while.
Attempts to re-commission the machine was unsuccessful, as I...
Hello
I own a Mori Seiki MV 40 b and I am proceeding to retrofit the Fanuc Controls.
I am willing to give away the control boards and components free, just pay shipping, if you are interested....
Hello everyone.
I am not sure how, but I lost all the parameters on my mill. It has been down for a while and maybe the batteries died.
Does anyone know where I can get hold of the parameter...
Hello everyone,
I need a copy of the air circuit diagram for my Mori Seiki MV 40B Machine Center.
I have the maintenance booklet, but the copy is not so great and the diagram is very difficult to...
HEllo,
I have a Mori Seiki MV 40B CNC MAchine Center with Fanuc 10M contorl
I am looking for the Fanuc Operating Manuals
Can you plese assist ?
Hello All,
I recently won a Wasino Model LG-71 Turning Center and a Mori Seiki Model MV-40B CNC Vertical Machining Center at an auction.
They look in good condition, but I have no manuals. I...
Thank you for your help.
I am having another problem however.
It has to do with Electromagnetic Interference.
Whenever the Plasma Torch fires, the GEckos go low indicating a fault.
I have...
Hello,
I am Building a CNC Plasma using MAch 3
My Break out Board is from CNC4PC, and my controllers are Gecko 320's
I have two of them on the Y axis, one as a slave, and one gecko on the x...
Hello
I recently purchased a Hurco MB1 in an auction, and I know it will need retrofitting.
Hurco replied that they have no retrofit for thi product.
Can you please advise what to use.
I want...