Search:

Hi Joba:
Neither the DSP nor the Ncstudio can handle the DXF directly. You have to convert DXF file into G code file through CAM software.
Regards
Alan

Hi Daniel:
Of course, you can make the holes, bores and grooves first on the whole board then cut it into pieces. it is easy to make it in a CAM software, such as: type3, artcam etc. you can order...

Hi Daniel:

We would love to NOT have to touch the 4'x8' sheet at all once we load it, but we also know this may not be a possibility.

I mean wouldn't it be great if you could load a sheet and...

Hi Daniel:
I am Alan from China and a manufacturer of cnc routers.
I read your post, for your work, you need to cut(9 pieces), drill(make holes), nose and form the edges. it is a multi tasks...

Hi, I am Alan, could you pls send me an email about your picture, i cant see the one you post here. i made some machine with 2 y for my small machines. Maybe i can give some advise if i can see the...

Hi Hamed:
Since you have downloaded the English label and menu files, you can change the languag as following steps: when it shows when you supply power, then press "Delete"(DON’T GO...

Hi Wombilly:
pls give me your email address, i have the info you need. Mine is:[email protected]
cheers
Alan

HI Emanuel587:
If it shows your message, it means that the controller gets signal from Hard limit sensor of Z axis. when this happens, the controller can not move the machine any more. what you...

have you got your controller? for the parameters, you have to set according to your components of the machine. Such as: pulse equivalent is decided by the motor, the ballscrew and the drivers...

Hi Mecanicu:
pls check your delta inverter's version. Maybe you are going to change HSD ESE929 and it has a 4 poles motor, and you'd better ran it 24000rpm, 12000rpm is not good. for the delta...

Hi Rob:
Thanks for your trust. And i think it is much better that you buy from whom you bought your cnc router. Because they know your machine better.
If they can not, then you can send me...

hi:
i am Alan, I have worked for years in the dsp company, so i think i can help if you are still in troulbe.
pls add my messenger: [email protected]
Regards
Alan

For the XYZ0 you mentioned, i think it is the working origin. if the home sensors bent, and you repair them, the machine coordinate changes, in order to get better accurancy, you have to reset the...

Hi Bananafish:
You need to make the home sensors wrok first. Maybe you have done it. the controller needs to get signals from sensors to tell the machine coordinate position. if the sensors are...

Hi Kai:
the dsp controller supports most G codes, M codes and F code. but it does not support S codes in the g code files. And the Dsp controller company has no plan to make such function...

Hi Woodmizer:
Read your stories and it seems that you have found some solutions. you'd better push the emergency button when the spindle stops spinning, not pulled the wood out, it is dangrous to...

Hi Rob:
I got my tool sensor from LNC cause i am using their controller for my woodworking ATC machines, it works very well and its price is about usd150.0 here. Of course i searched tool sensor a...

Hi Rob:
It is nice that you made it work!
you are completly right, it is easy to make the tool sensor work connecting one wire to the Z axis, but it is not good one, even sometimes it is...

Hi Rob:
thanks for the picture, yes, it is a 3G version not 3B version. For the breaking board, i saw CUT, i think it is the tool sensing terminal, and it is wired, so have you connected Cut and...

Hi Rob:
I think it is PCIMC-3B not 3G.If it is 3B version, for auto tool sensing, you need connect wires to Pin1 and pin14, Pin1 is signal,while pin14 is GND,when the two pins short circuit, the...

[QUOTE=SkipW;823098]I know this is a couple year old post but I didn't see where anyone answered this question, and I'd like to know too.

You can enable the F codes on the DSP to read the feed...

Hi Wiwatto:
Have you got what you wanted, if no, i will be glad to help.i am Alan and we are professional cnc router manufacturer, we have different woodworking cnc routers, such as: SRT-W200...

G'Day Bananafish,
the dsp controller can control the speed by the F code if you enable it in the menu. but it will still show the parameters of the controller include the prc speed etc, it just need...

Hi Hamid5019:
I am Alan from China, and i read your post, how is your DSP now? Still have problem? Because once i worked in DSP company, so i know something about it. And hope the following...

Hi Cenicero:
it is nice that your new controller works well. Good luck all the time.

[/I][/I]
Hi Rocket:
For the Cable, it is always a problem. In 2005, it even caused big problem, and what you are using one is the updated one, much stronger. Because there are 50 signal wires...

Hi Rocket:
I am new in cnczone, and i will try to stick as more as i can.
Alan

Hi, rocket:
I read most of your posts, not all, and i will continue tommorrow. You shared your stories to others and tried your best to help those who need. Real nice man you are! I worked in the...

Hi CBJB:
I think you need contact the laser machine manufacturer who you purchased your machine. As i know, most laser control system support Coreldraw12, and what you need is the manufacturer's...

Hi, I read the posts. I once worked the Dsp company for years. the questions for Cenicero and Andre09 are quite different. Andre09 have to send the controller back to the China for repaire because...