Would anyone know the removal procedure for the Y axis servo motor for a MV40B? Its looking like I need to remove the motor to replace the encoder wheel possibly and do not have the service manual....
Type: Posts; User: Matthyj
Would anyone know the removal procedure for the Y axis servo motor for a MV40B? Its looking like I need to remove the motor to replace the encoder wheel possibly and do not have the service manual....
I have a 1989 MV 40B with Yasnac MX3 controls, machine worked great yesterday and started it up and goes instantly into Alarm 392 SERVO ALARM (SERVO PACK) (Y)
The machine does not appear to be in...
unfortunately I dont have the ladder diagram, however I was able to trace down where the coil was getting (or not getting) its voltage and found that the B stat relays where working but the Omron...
Thank you for your reply, I will check the float switches. My manual buttons are not working as well, like the whole system is shut off for some reason? I have checked all wiring and all components...
I have a MV40B with MX3 controller, it goes into alarm 554 lube/oil alarm. I do know I had a pressure switch that was stuck on the spindle luber, I have fixed the problem but I cannot get the lubers...
Thank you, I incorrectly listed the alarm as its a actual 554 alarm, I also have located the pressure switch in the spindle luber but can not find a pressure switch in the way luber, it does mention...
Hi, I am new here and I recently purchased a 1990 MV40B with MX3 controller and upon start up I know the way lube and spindle lubes are started and pre lube and then are done with a timer after that,...
I am a starting hobby machinist, I am interested in making small cosmetic parts for streetrods in small batches and finish machining custom cast aluminum parts to sell, I see a huge value in having a...
Hi everyone, new to cnc machining but have some questions as I am looking to convert a knee mill!