there where different problems with each machine.
- one had a faulty AS2 switch failing to give the push finished signal
- the second had faulty wiring in the cabinet not letting the M85 end signal...
Type: Posts; User: SutherlandMachining
there where different problems with each machine.
- one had a faulty AS2 switch failing to give the push finished signal
- the second had faulty wiring in the cabinet not letting the M85 end signal...
thankyou i will try this :)
Hey guys and girls, I have two different Fedek bar feeders that will push the stock but will not continue from there
One is a second had new bar feeder and one just failed mid cycle.
They are...
I am not sure Re: Ohmic Sensing. are you saying that there may be interference (noise) from the plasma being induced into the sensing Circuit?
I have found an error code #9 Output voltage above...
I am looking for a set of parameters macro's and anything I can get my hands on for the same machine any help would be very helpful
I am looking for a set of parameters macro's and anything I can get my hands on for the same machine any help would be very helpful
did you sort this problem ? iam looking for a set of parameters macro's and software for this machine can you help me ? i have a copy of the manuals to help with those drive errors if you need
do you still have access to this machine ? I am looking for a set of parameters macro's and anything I can get my hands on for the same machine any help would be very helpful
Good morning everyone, I am working on the above machine and having some trouble. the machine has just be brought second hand and the customer is seeing problems holding an Arc. It pierces fine and...