sorry posted on wrong forum, ignore me
Type: Posts; User: Stu_M3
sorry posted on wrong forum, ignore me
the algorithms used in the machine control use a format as shown in the diagram, where (0) degrees is at the 3 "o" clock position and (+)value degrees produce an anticlockwise motion.
just...
I use a null modem cable for my OM and set up as follows
Baud 9600
Stop bits 2
Data bits 7
Parity Even
Flow control:- software DTR & RTS enabled
X ON CHARACTER \17
X OFF CHARACTER \19
I...
the attached PDF may be of some help to you.
Regards STU
I use Oxygen open office which is open office with some extras, 3,400 graphics 90 fonts and an enhanced menu. The PDF export option is very handy and I also like the fact that the file size is approx...
The vibration and slowdown is most likely to be caused by your post processor generating lots of small moves to generate radii if your cam system can generate arc output use that instead for smoother...
That is a small number of components. If you have ever seen the Humbrol Chocolate money box on sale in argos. the mold for that is made of Aluminium and it has made in excess of 1,000,000 mouldings...
http://www.roehrtool.com/core
Not quite sure what you are asking here. Is it an aluminium part that you want to make in plastic or is it a protective box for your aluminium or is it a die casting mould you require. Or is it a...
I once made a large Aluminium mould for a 4ft long frame the air escaping from the corners produced so much heat escaping, the aluminium melted at the corners which had to be replaced with steel...
O6000
N1 ( ----- START BLOCK ----- )
N5 G80 G40 G90
N6 G53
N10 M6 T3
N15 S1000 F350
N20 G00 X0 Y0 Z100
N21 ( ---- PROGRAM ---- )
#100= 5.0 (NO OF LOOPS)
WHILE[#100 GT O.O]DO1
Looking at a pic of your machine it appears the spindle is in the Y axis, I am unfamiliar with this type of machine but maybe you are working in the XZ plane(G18) and therefor the plane needs to be...
If you have macros enabled her is a macro I use for bores on an OM control
%
O0001(***HELICAL MILL*****)
(z=depth,Q=PECK/REV,D=DIAM,C=ALLOWANCE,R=RAPID HT)
(C IS THE OFFSET FROM THE BORE FOR...
:9020 (TOOL CHANGE MACRO)
IF[#1015 EQ1 ]GOTO50
IF[#20 EQ#0 ]GOTO60
#1100 =1
#106 =BIN[#1032 ]
IF[#106 EQ#20 ]GOTO40
#101 =#4001
#102 =#4002
#103 =#4003
G17 G91 G80 G0 M86
http://www.dms-diemould.co.uk/
It appears DMS uk is different to what you can obtain in USA.we can obtain products from the USA so I would Imagine If you ask they can get you parts from the UK....
Ball bushes can be found in the online DMS Cat in section 5 page 14.
at least thats what Im getting here in the UK.
Regards Stu.
Also try
http://www.boschrexroth.com/is-bin/INTERSHOP.enfinity/eCS/Store/en_GB/-/EUR/CatalogFrameset461038-Start;sid=UX3XQ8znUADXqYSP-QEWLxUtnYGXKXz0DjY=?bridgeSelectedCatalog=DE_BRL
Stu_M3
I use DMS recirculating ball bushes they don't have the problems that the other type have ie. the liner comes out as the bush moves
5.162 in the dms cat
code RBCS - D x C
bore diams...
About 30 years ago someone produced an aluminium neck'ed guitar it had a perspex body the neck was a "T" section with wood inlay's no doubt to make it a bit warmer to the touch. It prompted me to...
I presume from the prog that this is a lathe. I am not familiar with lathes but if you have a drawing of the part you are machining and also a bit more of your programme I might be able to help. ive...
sounds like the end points are out somewhere post your programme
My own suggestion would be to abandon the project altogether and not add to the growing knife problem.
Allow for one or the other component to be slack until you have shots off the mould then adjust the sizes till you get the fit you require
Stu.
Point 1 x coord = A
POINT 1 Y COORD = B
POINT 2 X COORD = D
POINT 2 Y COORD = E
CIRCLE RADIUS = F
WHEN THE CIRCLE IS LEFT OF THE LINE FROM POINT P1 TO POINT P2 G=-1
C=F
H=D-A
I=E-B
Ive had a demo version of this product. it is very capable also it has the machining from machining strategeist incororated. which is my favorite package which i have as a stand alone product. visi...
you can also use a While do loop:
T21 M06
(1.25 3 FLUTE)
G90 G58 G00 X3.25 Y5.
M88
S1800 M03
G43 H21 Z1. M08
G01 Z-0.05 F15.
#100=51.0(Number of Passes)
It also makes sense to specify the machine the control and also put a few punctuation marks in sentences. Some of the posts are a joke we ought to start a new forum with all the worst examples...
This would be rather a complex programming project you would first have to have knowlege of dxf file structure and be able to extract co-ordinate information from that. having obtained the end points...
Personaly i only use local variables for values which are calculated each time the macro runs. I use common variables ie #500 onward (Fanuc) to store set up parameters which I want to remain the same...
Hi mmachining.
ran your programme through my backplotter and it would not run when set up for hurco. but when i changed to fanuc configuration it did. which suggests to me that you are using...