Hi Bill,
My shop specializes in small diameter machining. Email me at [email protected] and I'll quote for you.
Thank you
Adam
Type: Posts; User: Hueter
Hi Bill,
My shop specializes in small diameter machining. Email me at [email protected] and I'll quote for you.
Thank you
Adam
I understand what you're trying to say. You have in effect changed the left hand tool to a right hand tool by turning it around and it will cut in M3. The only difference is now the left hand...
Check to see if the emergency stop (big red button) is not stuck in the emergency position.
I have tried to simplify this answer as best I could with the attached diagram. If you turn a tool upside down and put it on the other side of the spindle, it is still cutting in the same direction...
Please see the attachment for my attempt at illustrating what needs to be done. I have to manufacture the pin the will hold the barrel in figure 2. My customer wants me to then press my pin's...