Search:

Hi mbservice, thanks again. According to operator before the repair, the machine has limits (overtravel) by software, not "limit switch".

Good afternoon, I'm happy to tell the machine is operational. But now we need define the limit of each axes to avoid collision.


Please someone who knows how and where we can put this parameters....

Hi Alicnc, sorry for the delay but I don't have information for this machine. We lost manuals, and backups.
In the end we had to contact a technician who reviewed the faults and sold us the damaged...

Hello, good morning, thank you very much for all the information you gave me, but in the end we contacted a technician who knows these machines and we request service for not having any backup of...

Good morning, sorry for the delay.
The machine is stopped, but thanks to the manuals we can check the connections and find the fault. There are damaged cables in very bad condition. We assume this...

I have answered the message, thank you.

http://www.cnczone.com/forums/attachment.php?attachmentid=377396&stc=1 http://www.cnczone.com/forums/attachment.php?attachmentid=377398&stc=1...

Hi navinbhas, unfortunately I do not have the backups.
There is some way to obtain them, they must be bought or I can get them with someone, do you know something about that?
Thanks.

The 7 segments are showing "Ab" and we got the following error on the NC Screen.

http://www.cnczone.com/forums/attachment.php?attachmentid=376892&stc=1...

Hello agering, I can't find the PCB model number, tell me where to find it please.
greetings.

Hello, the cnc system is a Harrison - GE Fanuc. I think the PCB might be A826 XXX, anyways i'm attaching a lot of pic's. If there is any chance you got both machine and cnc manuals it would be very...

Can you help me with the manuals, too, please?
o some information.
Thanks.

hello navi, we made the indicated and now it is in the following way:...

Greetings to all, I hope you can help me, I tell you my problem:


In the company where we work we have a machine 600 Lathes Alpha 550 year 1996.
The other day we turned on the machine as usual...

Good morning.
The status of the LEDs are:

QX084,
LED 1 = ON - GREEN
LED 2 = OFF
LED 3 = OFF

QX141,
LED 1 = ON - flicker GREEN

Navin, hello.
Here is the information you requested.
...

Hi sudsy, it does not have a floppy disk drive. Thanks for answering.

Hi navinbhas, I will see the state of the led and tell you.
Thanks a lot.

Hello, anyone who has information, even if they do not know the solution. Thanks.!!!


Thanks
Thanks

Good afternoon, I'd like some help and information.
In the company we work with a machine MAZAK model VTC-20B with the Mazatrol M PLUS controller. What happens is that when you turn it on does not...

Hi, I'm Humberto De la Rosa computer engineer from Chile. Sorry for my translation English, I'm not good at writing English.
I joined the community because I work in a company that owns some CNC...