What is the difference between ISO g-code post processor and Fanuc g-code post processing. Can either be used on a Fanuc 0i-m? Thanks.
Type: Posts; User: n2xd
What is the difference between ISO g-code post processor and Fanuc g-code post processing. Can either be used on a Fanuc 0i-m? Thanks.
it is very hard to trust a product that will not download a piece of software that can be looked at for a trial period. I guess I will try something else.
I have a basic question. Can Path Pilot be used on a diy cnc conversion? If so what would be required to complete this? Thanks.
John
I'm going to try and use the Masso on a Surface Grinder. I have had the Masso for some time. I'm finishing my Milling machine wiring that I converted to CNC using an Centroid Acorn. Actually looking...
Is there anyone near Franklin,NC (in the western mountians). I'm going to start wiring up my CNC milling project. I am still very new to this hobby.
John
Looking forward to watch the progress. Always glad to see a young company making a start.
John
I would like more detail also . Thanks
Anyone on with the group that is using BobCad-Cam with the Centroid Acorn Controller? Thanks.
John
Never mind Andre. Operator error on this end. Thanks again.
John
Thank you Andre. Could you please send me the .PP file for some reason the zip file will not unzip for me. Thanks.
Jogn
Can any one tell me what major brand these servos and drivers are copies of?
...
Has anyone written a PP for the Dolphin Mill Pro and a Centroid Acron that they would like to Share? Thanks
John
Thanks to everyone who replied.
Thanks for the information Dean. I'm new to cnc and I'm still working on the conversion. How hard was it to rewrite the PP?
John
Is there any one using Dolphin with a Centroid Acron setup.Thanks.
John
I really plan on anything that comes up in general. It will be on a cnc conversion of an PM940m milling machine. Mostly for making parts for some of my projects. probably not mush art work or any...
I really plan on anything that comes up in general. It will be on a cnc conversion of an PM940m milling machine. Mostly for making parts for some of my projects Not much art work or any thing like...
Hello to all,
Keeping in mind that I'm new to CNC what are some of you fine folks using for CAD and CAM using a Centroid Acorn control card ? Thanks.
John
I know it is quite a way from Decatur but you can see mine here in South Carolina near Columbia.
John
C110 can be dead soft.
Dead soft is not a "street term".It is the softest level of the annealing process for copper.
Thanks for the info sharpshooter.I did my own vfd mod on the patriot and I really like that.I've away from a machine shop for over 40 years so it may take me awhile to catch up.
Anyone know have information about the DC power feeds that is now being offered on the Patriot?