should be august 2008 machine
Type: Posts; User: greggm
should be august 2008 machine
i have a 5 x 12 router with a rotary and some time ago the z drive would trip "limit switch" if i ran it passed 50ipm and now the drive on the side opposite x0 y0 consistently runs 3/8 from the...
I am making some retail store displays and they are complimentary to get my product into the stores, I need to know what material would be economical to machine the mold out of and then some kind or...
I want that check box to always be on bottom left.
Thanks for the reply!
Gregg
Is there somewhere to set my defaults to bottom left as I am using a router to cut sheet goods. ver 23/24
thanks
How do i go about drawing a "furniture leg" with curves and coves etc or and then turn it into a rotary (A) tool path.
I have purchased 3 1/2" square cedar post to practice on so i am thinking a...
bobart pro and bobcad v23
how do I dish the material out but leave a raised emboss/lettering/logo in the middle of the dish
I tried a solid rectangle 6 x 6 x .75 thick x0 y0 z-.75 bottom left ...
can i import my drawings from vcarve pro 5.5 to bobcad ver 23 now, upgrading to ver 24 soon
what file ext does it need to be in .tap .crv etc?
thanks
gregg
Thanks for your help....I got it to run..
I had a question, when you measured the height... at 3:50 mins on the the video you said the two lines were .240 apart plus a 10th... where does the 10th...
i have a ez router running mach 3
somethings that confuses me about the bobcad are
a) that my machine is x0y0 in the bottom left corner )x 60" wide and y 144" long,,, where to i change the...
I need to machine a 25' radius into a bowl shape
material will be 3/4 thick x 24" diameter MDF to make a guitar sanding pad.
i assume i will be using a cove/ ball nose bit
I have bobcad v 23...