Search:

Dear Friends

I need the Parameter for the Bridgeport VMC Model TC2 with Heidenhain TNC 370 control and NC- Software 280600 13 and PLC-Software 278215 11,

Kindly Help me to Switch ON the Machine.

Dear Friends

We are having Daewoo VMC Model DMV-400, Serial No. .AV3S ;0014 with Fanuc 18M Control. Parameters Lost. Kindly Help to Switch ON the Machine

L. Sakthivel

Hi friends,

I am having Hardinge VMC with Fanuc 0-MD. I want The Display of ladder diagram. but in the ladder page I am getting the following message.


"DISPLAYING THE LADDER DIAGRAM IS...

Dear Legos

I hope you have solved your Machine Problem.

We purchased Used Brother TC-201 with CNC-510 Control. We Switched ON the Machine we are getting Blank orange Display.

Kindly Suggest...

Dear Friends
We are switching on ANCA FASTGRIND Model 2000 LVL1, we are getting Memory file Damaged, Memory initialize Necessary alarm Message while switching ON the Controller. We are not having...

Dear DELW

Pl. Help I am Facing same Problem What is the Parameters to enable.

Dear Friends

Can i get Fanuc OPC Parameter Manual

Dear Mr. Shekar
We are having Mazak Qt 30 Machine with Mazatrol T Plus Control. Now we are getting Alarm 214 PLC - Parameter Input Error. Kindly Suggest to solve the Problem

Dear Friends
Our customer Bought Kitamura Mycenter 3 with Fanuc 11M Control. Parameters are Lost during Transit. Kindly Help us to switch ON the Machine
L. Sakthivel

Dear Friends
I need Parameter list for Kitamura Mycenter 3 with Fanuc 11m Control

Dear Gbowne1

I am Looking for Fanuc Schematic Drawing for Fanuc Servo Drives & Spindle Drives. If you are having any Manuals Pl. mail to me. My email [email protected]

Hi Ghul

Kindly mail me the Fanuc Drive Manual my email id is [email protected]

Dear Friend
We just Bought SUGA CNC Lathe Model AT - 15, Japan Make Machine with Fanuc 0T Control. Unfortunately Parameters are Corrupted and we are not having Parameters Back up.

Kindly Mail me...

Dear Friends

We bought a OKUMA LC 30 Used CNC Lathe withOSP 5000 LG Control. We are not Having any Backup Parameter & Software for this Machine.

While switching ON We are getting this alarm No...

HRH Reply is exactly correct. The 5C and 6C is the version changes. Function wise both are Same no need to worry about the Version for Replacement.

We are switching ON the Old CNC Machine with Fanuc 12M Control. After Switching ON we are not getting Display.
We checked the 9 inch CRT in ON condition, Brightness & Contrast Changing.
In between...

Dear Friends

We bought a OKUMA LC 30 Used CNC Lathe withOSP 5000 LG Control. We are not Having any Backup Parameter & Software for this Machine.

While switching ON We are getting this alarm No...

Dear Sir

D500 we set the Same & we tried for the other options also related to turret no improvement.

Dear Memoryman

Sorry for the inconvenience my email is [email protected]

Optional Parameters can be entered only in the Master side. Slave side is not possible to enter.

I...

Dear Memoryman

I need the procedure to enter the Parameter in Fanuc oTT system

Dear Friends

In our Wasino Machine having Fanuc 0TT system. Now all the parameters got deleted during purchase of the Machine itself. We are having the parameter copy. I want to know the procedure...

We are facing Ref. Shift Problem in Takamaz CNC Lathe with Fanuc 0t SYSTEM.

Ref Pos Shifting Every time while switching ON the Machine. after taking the new offset values for the tool position...

We are having Mitsu Seiki VMC with Fanuc 6M Control

Machine Absolute Value getting reset during reset the Program in Auto mode. it seems to be a Parameter Problem. any body can help us.

Dear Friends

We are having Hyundai V550D VMC With Siemens Shopmill system.

Atc Arm position is shifted little bit Backward so before holding the tool in the Spindle, it gets Unclamped & Tool...

Are you having Electreic Diag. Check the Pallet changer Ckt may be having the signals of Emergency, Pallet clamp, Pallet in position, Pallet Number inside the machine etc.

Iam not familiar with TPP but the alarm means Check the Clamp position & Clamping zone entered in the system

G01 is the Linear interpolation only try G02 in place of G01

Check the following areas
Control panel Door interlock
Phase sequence relay if available
Over Travel Limit Switches, Push the OT Cancel switch and check
Air pressure switch
External emergency...

Post your part program

Pl. check any short circuit of cables & Check the status of the Master PCB power supply unit or Power unit if available. We need the full informations to give the suggestions.