Tool Presetter is not functioning.
How to set tools without presetter and with presetter.
Fanuc Oi-TC controller.
Type: Posts; User: rajanvadakkepat
Tool Presetter is not functioning.
How to set tools without presetter and with presetter.
Fanuc Oi-TC controller.
i tried this but an alarm is coming.
programming error.
hi,
I am from singapore,
can anybody help me to the below request:
i need to add some alpha numerical letters with my fanuc oi-tc turning programms
eg; if my program number is O1111 after i need...
hi friends,
needs your help to write some sample programs for new fanuc oi-tc lathe.
i need to tap 3/8-24 tap to 27 mm legth.
i using g99 mode in my lathe .
please help me to write the proper...
try this method.
G71 U 0.20 R0.50;
G71 P 100 Q200 U0.01 W0.0 F 0.0002;
N100 G0 X ... Z 0.0;
G1 X.....
..
...
...
N200 G 0 Z 2.0;
G28 U0.0 W0.0
need help from experts,
recently i bought an edgecam software 12.5 version to my alextech cnc machine. using fanuc OTi controll.
seeking your help to make a post processor for this machine.
how i...
hi,
can anybody help me to write a programm in fanuc for thread cutting on lathe using G92 or g76,
3/4 "-16 UNC-thread with 1" length of thread on a 0.749" dia.
the important part is there is a 10...
can any one help me to make a post processor for Fanuc Oi-tc.
using edgecam 9.0
if can email to me at [email protected]
thanks for your time.
hi all,
please help me to get the spec of memory card to buy.
storage program and transfer to cnc machine.
my machine control is fanuc Oi-tc.
Alextech lathe
which card is more suitable.
sd,xd,...
hi all friends,
i am very new in fanuc control turning work. could anybody help me to do the programming examples with fanucOi TC.
just an examples allthe turning jobs including such as...
use HSS/bronze drills (dormer drill) PFX group.
use peck.
use coolant
RPM set as 150~200.
good luck.