120$ wow...... thats really cheap!
Type: Posts; User: thomasz
120$ wow...... thats really cheap!
Ahh okay - thanks.
Hi!
is it possible/meaningful to equip a 4020 HT (1999, AC axes) with glass scales?
Or is that too expensive?
What else do I need besides the scales and cables?
Thomas
Hi!
I have a VH65 here and don't know about the headless screws in the clamping-side.
What are these for? I do not mean the four big threaded holes, but all the little ones with set screws.
...
Thanks - it works.
Hi,
I have to change the cylinders from the hi/lo-sytem (4020HT).
Thats no problem - but in the manual are two points I don't understand:
The reservoir is full when oil enters the 5/32 line on...
Hi,
thanks for the pic!
A fyl-cutter with two tooth, right? I know this only with one tooth.
Thomas
Hi,
@mniadna
cool videos - thanks.
What tool do you use for milling the table?
In the viedo it look like a miller with one tooth.
Do you have a pic from your tool?
@underthetire:
I think...
Hi!
I have some questions:
1) mill table (O5831): what kind of tool I have to use here? a pic would be cool!
2) scrape table (O5830): are this the little round tracks in the table, and what...
Hi!
In 4020HT-manual i can read:
"Range should be not less than 100 or over 250 PSI"
Thomas
Hi!
I did yesterday a monitor with RCA jack on the 88HS. It works.
Unfortunately, the letters a little shiver. Can I do something?
Thomas
finished, was easier than I thought
thanks!
Thomas
Ahh okay - thats a good idea!
I'll try it.....
Is there a chance to change both mounts without remove motor complete?
Okay - the left side will be simple - but the right side?
Ohh thanks! :rolleyes:
So I have to get them out, measure, install old mounts back,
make new mounts with the machine, get old out again and then
install new mounts.
Thats the reason to ask...
Hi!
My motor-mounts (MTR-0068) on 4020HT are running out.
I think I would made new solid mounts.
Does anyone have the dimensions of it?
I would get it out to measure, install again, make the...
Hi!
I have tested on the 88HS a normal
VGA-LCD with 15pin VGA-Plug and a Composite-Adapter
(eBay: Neue und gebrauchte Elektronikartikel, Autos, Kleidung, Sammlerst)
It doesn't work.... :(
...
Hi!
I need to get this thread up again....
>SK-3012R Monitor
--> earthlcd: "Unfortunately, we do not carry the SK-3012R anymore due to
the card not being manufactured..."
Has anyone...
thanks!
it went easier than I thought....
I used a small grinder and made the holes a little bigger
... 10 minutes - floater was out :)
ohh sorry - i mean "DRB-0004 : FLOATER RING NON-LDB & LDB"
in the spindle-end
Hi!
How to remove the floater from the spindle?
A magnet does not work unfortunately.... i think the two bearingballs
don't come to the center enough.
Thomas
First I think start a new thread...
sorry : B7210 E-T-P4S UL of course
now we have decomposed the spindle
there are
two 7012 ACD GA/P4A (B7012 E-T-P4S UL)
and
two 7210 ACD GA/P4A (B7211 E-T-P4S UL)
installed
okay - i try to explain:
the space between face of the spindle and flange from one toolholder
is now 0,7mm (0,027") - there are other toolholders with little more space
but 0,7mm are the...
the spindel ist already build out from machine
do you use the adapters i told you?
Hi!
The two drive dogs - you are right.
You can't unscrew them - see pic.
Thomas
Hi!
We have to rebuild the spindle in our 4020HT (10.000 grease).
To chance the bearings and grind the taper isn't the problem,
we have a partner company that does it for us.
Problem is if...
okay - i see, we come to no right way.
another idea:
there is an option for fadal you can use a simple usb-stick and plug it
directly to the fadal. then you can load the programm from the stick....
have you ever test once?
don't look so.