Hi to tap 200% retract speed you have to set up M135
N41 M135S804 ( that means 200% retract)
N42 G84G98X-119.875Y-60.0Z-140.25R-115.25F1005 ( retract F2010)
Type: Posts; User: roberton26
Hi to tap 200% retract speed you have to set up M135
N41 M135S804 ( that means 200% retract)
N42 G84G98X-119.875Y-60.0Z-140.25R-115.25F1005 ( retract F2010)
Hello everyt body.
I have bought one charmilles robofil 290F used and we want to progran the machine with fikus.
I have not problems with the machine but now I have to explain to the fikus...
HI Shina
I could not answer before
How can I to get the CSS value?
As you have said the #4119 only give the S-word and I need to get an approximate value of the spindle speed.
Thanks...
Hello guys
Is there any different variable to get the real turning speed of the spindle ?
When I have tried to get the real turning speed by #4119 If I have programed some value using the "S"...
Is there any possibility to do this with macros or any parameter to solve this problem?
Mirror axis position
Hello everybody I am trying to restore the axis machine position after switch off the mirror function on does not correct position.
I am doing a macro to check the...
Hello
I have been trying to move *inside of a program which is stored at internal card using Goto or While and the fanuc gives an alarm
Is it possible to move inside of a program Which is not...
Hello
Yes also #4315
Thanks
Hello Sinha
I have tested your advise and is ok
After your information I have taken a look to peter smid book and also the #4315 give the number of program that is working
thank you...
Hello everybody
I would like to know if is there any way to know the subprogram number that is working on machine then after used the subprogram number as #
M198P7800
#100=#4012
#100=7800
Thanks...
hello bill
sorry for my delay to answer.
I have been checking the #1032 in the makino.
M08
#100 = #1032 answer #100=0.0
M00
M30
Hello
My question is the next.
Can I change the machine signals input and output, by a macro program in fanuc control 30i?
I am trying to change the coolant signal in a horizontal makino...
Thanks for answering.
As you say I have got all fanuc manuals and makino manuals.
I am trying to make custom macros to makino.
One of my questions is How could I find out the signals that...
Hello I would like to get a manual for programing macros.
I have got the original fanuc manuals, but It does not explain very well How I have to develop the custom macros.
I have been looking...
Hello and what about makino?
I would like to vote for makino.