Search:

nobody ?

hello

I broke the usb connector of my CNC3018 pcb board (connector)

anyone knows where to buy a replacement ?

it's gerber 0.9 while gerber 1.1 is available and since I wanna use Candle, I...

there is no way that machine is powerful enough to cut through wood
none of the examples shown on the web site show wood beeing cut
you ****ing spam

Hello

I use a chinese cnc3018 and bCNC as software

even if I lower the feed, the bits breaks off after 1 second of milling; I scan the area first, so I dont understand why it breaks

it's...

thanks I'll check it out

I lowered the feed rate in the mean time, seems to help a bit

I scan the surface, then I start the cnc process, the bit breaks off all the time (just the tiniest bit of it)

so I rescan, reengrave, but loose in precision and top/bottom layer never prints the...

ok but does it RUN the cnc ?

Hello,

I started with bCNC, but it's really buggy

can someone point me to an easy to use soft to mill pcb's

thanks

I bought a CNC3018 on aliexpress

after digging a bit, I found the probe pin was A5

I also attached hard limit switches, but I need to add capacitiors

what pisses me is that there should be 6...

Hi,

the poor documentation that comes with these chinese cnc, does not indicate any pin for autoleveling probe

I saw many youtube videos doing autoprobing but none of these mexican guys are...

One last question,

how did you manage to attach teh metal clamp of the new spindle motor to the cnc ? I was thinking about printing some plastic adapter...

ok thanks,

I guess I'll order a 2418 and see what I can do , reprint maybe a better header or even order a separate spindle

hard to tell if it has low vibration from the picture, I guess it's linked to high RPM, I mean the fastest it turns, the more equilibrium

low runout, you mean low current ? cos 400w does not seem...

169$ it's almost the price of the cnc I want to buy...why that spindle ? do I need such an expensive one ?

do you need to modify the cnc ?

Hello everyone,

[ I am Phil, I do electronics, 3D printing (and Angular programming for a living) ]

I recently became interested in making PCB with cnc, so I found a couple of cheap(200$-200$)...