It appears to me you either loosing steps in Z axis as pointed out by Breezy1849, or your End mill is not clamped correctly and creeping out or your motor is moving.
Are you using screws or belt...
Type: Posts; User: gstprecision
It appears to me you either loosing steps in Z axis as pointed out by Breezy1849, or your End mill is not clamped correctly and creeping out or your motor is moving.
Are you using screws or belt...
It is a bit weird having 2 different bearing with different sizes. I read the draft manual I found online again and it specifically says to remove the 7006 bearing (Item 15), the 7001 (Item 30) and...
Hey guys. Planning on replacing the ball screws on x and y axis.
I do not have parts diagram and I would like to know if anybody could help me.
The parts list is showing 7006 and 7001 angular...
Why don’t you create a new component (milling jig), join them with an negative offset then use the combine tool with the keep tool function checked? It is how you create soft jaws.
Youtube search...
Not very hard. If I just put light pressure I get about 0.004”. If I really push hard that is when I can get it to go about 0.007”.
I get light chatter marks when machining 6061 but nothing crazy....
I guess I have not been lucky lately. Before I bought the mill I contacted them and got a reply within 2 days from John I believe. After I bought it I inquired about a manual and some drawings I was...
Hey guys. Going through with more adjutments and finding all the bugs on the mill. I did some testing on the spindle last night and I have about 0.004” to 0.007” of play on the spindle nose when...
Thanks for the replies. I came home this afternoon and took the gibs apart. On the X axis the right side is the adjustment and the left a stop/lock.
On the Y it is front is adjustment and on the Z...
Steve303, the Pulsar is different it uses straight gibs with many set screws.
Hey MKlotz70, I turned on PM option.
I cannot see the link you posted, says video unavailable.
I have tapered gibs on that machine if that helps.
Thanks
Hey guys. I need to adjust the gibs on my NM135 and since I can’t find a manual with picture I do not know which screws is the tapered one and which one is the lock.
Anyone can point me in the...
Seems like you found the problem. But just in case you still have it you may have to calibrate GRBL to your machine. There is a few videos on how to do it.
Hey guys, I acquired a few months ago an NM-135 and it did not come with the manual. I found some draft copy online but unfortunately it does not have the drawings/schematics.
Would anyone have a...