Despite the fact that it is older than dirt, there are still a number of people using it, so please make a reasonable offer.
The dongle is marked CASmate-Lite, N.H Version with a serial number
...
Type: Posts; User: keencoyote
Despite the fact that it is older than dirt, there are still a number of people using it, so please make a reasonable offer.
The dongle is marked CASmate-Lite, N.H Version with a serial number
...
Did you ever find your cartridges?
I Know this is old, but if you are still looking I have a dongle available for sale.
We are having a similar problem on an Okuma DSP700M mill. When I access parameter number 16, I am presented with a choice of bits 0 through 7, no bit 8.
Can anyone advise me which bit to use so we...
As covered in an earlier part of this thread, go to: <http://www.autochart.com/hermes/810_Manual.pdf> (2.8Mb file size) for the manual.
BTW: What is a key cartridge? I have never had it ask for...
I have a full copy of GravoStyle98 running a NHI 3400.
Is there a simple way of filling a shape? i.e.: fully engrave the center of a circle?
- George
I am attempting to decide between replacing the power supply which just died and converting the machine to EMC.
Does anyone want to purchase the cartridges and/or other electronics to help spur my...
I recently contacted Gravograph and they sent me a PDF (which I corrected and sent back to them).
Otherwise I now have a copy.
I also just purchased one of these (lots of cartridges).
Were you ever able to locate a manual? I would like to see if it works before I take it apart to salvage the router table.
The Seattle Green Festival is March 28 & 29, as an inventor I need to be there.
If you want more than a small, casual meeting you should allow at least 45 days notice to get the word out.
As to...
I just picked up (5) SIEI QUIX V-2M-1022-T vector inverters.
I am in need of installation/programming/service manuals.
Any leads would be appreciated.
Thanks,
- George Lawrence Storm,...
> I also tried G5, the machine does not recognize the code.
should have read I also tried G54, the machine does not recognize the code.
- George
G45 is what G54 is on most other controllers. So to use fixture offset 1 you would type G45 O1, as prompted by the conversational feedback.
I did home the machine before attempting to run the G45....
I will start by saying this is a school machine and I have no control over replacing the controller with something else.
At my school we have an old CNC with a Bandit IV controller. Everything on...
We have an Acu-rite III DRO at our school, it had a bad X axis scale which was replaced with one we had found.
This is works except that it reads twice the actual distance, i.e.: 1 inch travel...
Would you be interested in letting go of your CASmate Pro dongle? I also am interested in any New Hermes fonts that you are not using and a CASmate manual.
Thanks,
- George Lawrence Storm
I would be interested in your Gravo98 Software & Dongle.
I finally dug out my books yesterday, Although it has some schematics and fairly detailed drawings of the mechanical assembly I could not...
What is your location? In the off chance you are in the Pacific Northwest it would make exchanging the data easier.
I know this is a long time after you posted it but...
I also have a 3400, I have the original technical documents which have the schematics, let me know if this is still needed.
As to the...
Please visit: <http://www.cnczone.com/forums/showthread.php?p=462505#post462505>
We also have a related thread regarding this going on.
Although preliminary my machining instructor is open to...
I would like to open the invitation to all machinists, CNC heads (wood metal plastic), roboticist, etc. Who else?
How about some suggested dates? (end of June early July do NOT work because the...
I'm still here, just trying to gage interest.
To the list in general: would you be interested in widening the invitation to include general machinists and possibly some other groups?
Don: Would you be open to making a technical presentation?...
The G3's with the 0.1125 radius are to for tangental entry and exit to the final radius cut which has a 0.125" radius.
Unfortunatly this control does not support G13. I will try your macro.
...
Just had a conversation with my machining instructor about this thread.
He would like to gage your interest in meeting at Lake Washington Technical College. Looks like the college is up for some...
I did a few experiments this morning, I found that setting the cutter compensation to .0555 worked, but setting it to .0556 failed.
It appears to be a mathematical limit, however it is occurring...
I'm up for a meet.
How many are you thinking about?
George Lawrence Storm, Kirkland, Washington
Hard core software programmer (C++, Objective C), however I am new to CNC and G code.
I am having problems using cutter compensation in a small circular pocket. My challenge is to mill an array of...