Search:

Ok Let Me Have It 100cc No Reeds Cast Iron Bore

Thank You 160 Mm I Can Do. 70 Hk Im Not Familiar With. I Dont Mean To Be Picky But If You Could Post Pictures In Bitmap Form .bmp .i Have Limited Internet Access At Work.

According To Fpv Gtp's Formula @ 8000 Rpm I Need 13 Ft Lb.s Of Torque. How Hard Would It Be To Have Cosistant Results Or How Safe Are Tranmission Dynos. I Found One In My Machinist Hand Book. It...

So Basically This Is Why A Roller Cam Is So Much Better.

Adding To Your Cam Max Open Would Bind Your Srings Same As Adding Rocker Ratio Correct.

My Family Runs Dirt Late Models My Brother,dad, And Myself, I Got The Chance To See My Brothers Motor On The Dyno. On This Dyno They Only Did Two Pulls And Then They Never Adjusted Anything To...

Isn't There A Drum Involved? If So About How Big Would You Need For Say 20 Hp Or For Go Kart ,lawn Mower . I Can Only Machine About 10 Inches Or 250 Mm. Always Wanted One Didn't Really Know Where To...

Hi All, As I Read Through This Thread I Think The Goal Was To Add 12% To A Cams Potential. I Have Learned A Thing Or Two About Cams Since I Started Reading. You Can Take A Welder And A Bench Grinder...

By Rotor Are You Talking The Yellow Cams Or The Hole Thing Set Up In A Row Of Like 2 Or 4 Or However Many That Would Be Required.

I Love The Way This Is Designed.

Could You Use Centrifical...

I Guess I Would Have To See The Inside

What Makes The Idle Rotors Start A Govenor Or Electrical?
Will These Start On Load Or Manualy Actuated?

what do you mean by function in many modes?

interesting none the less

There Was A Sale At A Local Comp. Store For This That Is Why I Asked. A Friend Sugested A Better Comp. And With All Of Your Help I Have Decided To Buy A Dell. Im Told They Are Easy To Update And You...

Look Out For Miller Welders And Gen Welder As Well Seen Some Last Weekend Same Deal One Day No Res.

Im Planning On Buying A New Pc And X3 Mill Plans Are To Convert Mill To Cnc Next Year Perhaps.
I Want To Run Master Cam And Some Other Stuff On It.
Mainly Is This Enough Comp For The Job?


...

ok had to ask

Do You Think Bracing Could Be Added
Say Two Peices One On Each Side Vert. So It Wouldn't Spin Around
-o-

Nevermind I Didnt Realize 42827 Was Round Column
Would It Be Wise , Or Can It Be Done I Guess To Put The 93885 Column On The 42827 Base.

Has Anyone Converted Or Is There A Kit Available For Th Hf-42827
This Mill Appears Bigger And Advertised With More Travel Than The X3 Mills Hf-93885