512,281 active members
2,710 visitors online
Register for free
Login

Search:

Type: Posts; User: shreifali

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Hi darry, I had the same problem but...

    Hi darry,
    I had the same problem but intermitting laser, fires sometimes and doesn't fire in other times.
    Have you resolved your problem?
    Thanks
  2. Intermittent laser and sudden power loss

    Hi everybody,
    I have bought the lxj1390 chinese laser machine 80w and now i regret the instant when i bought it.
    First, i have used the machine for about 10 minutes tests and the laser power supply...
  3. Creating stencils from ornaments for laser cutting

    Good day everybody,
    I am working on laser cutting ornaments from acrylic . I have a lot of ornaments vector files and i want to laser cut them from acrylic , but they should be converted to sencils...
  4. Replies
    2
    Views
    14

    High speed wood carving

    Hi everybody,
    I made my cnc router machine and it works great . But when carving 2 1/2 D models it takes a lot of time as the x and y axis have to wait the z axis to finish its up and down...
  5. Replies
    19
    Views
    2,153

    Re: Blown power supply dy10 for reci laser 80w

    hi again, here are attached the pcb and board pictures.
  6. Replies
    19
    Views
    2,153

    Hi, i ordered a new one but i am affraid of the...

    Hi, i ordered a new one but i am affraid of the possibility of that the cause that burned the old one is still there.
    By the way when the fuse was blown the first time the machine mechanics keeped...
  7. Replies
    19
    Views
    2,153

    Hi again and really thx for your replies. The...

    Hi again and really thx for your replies.
    The part number is HY-DY10.
    I will send some pictures of the blown 2sc2625 transistors.
  8. Replies
    19
    Views
    2,153

    Re: Blown power supply dy10 for reci laser 80w

    thx ies for your reply,
    i live outside US so sending the power supply to you will cost me more than a hundred USD for shipping:).
    please may you tell me what might be the possible causes to check...
  9. Replies
    19
    Views
    2,153

    Blown power supply dy10 for reci laser 80w

    Hi everybody,
    I bought a chinese laser machine lxj1390 and just while doing the first test cutting a 3mm of acrylic for two minutes i heard a pop and the laser stops emitting. I checked the laser...
  10. Replies
    0
    Views
    691

    How to solve a Tachus42 board problem

    Hi all,
    I built the tachus unipolar driver board and it was working perfectly.
    After abandoning it for a year and when i tried to reuse it the problem arised:
    The only working axis is the Z axis,...
  11. Re: Mechanism techniques used for a high speed z axis

    Thx dukerX for your reply,
    When 3d roughing with no change in Z , the machine is fast enough and at the same determined feed rate, but when there is a change in Z it slows . it becomes clear that...
  12. Mechanism techniques used for a high speed z axis

    Dear all,
    I have built my cnc wood router machine using rack and pinion mechanism for X and Y axis and ballscrew mechanism for z axis.
    The machine is working perfect but i am looking for enhancing...
  13. Replies
    3
    Views
    559

    Re: Tachus42 board power supply

    Thx james for your reply,
    Now another problem has arised :)
    The steppers mentioned above are Nanotec 4H5618C0408 and they are eight wires...
  14. Replies
    3
    Views
    559

    Tachus42 board power supply

    Dear all,
    I have built the tachus42 driver board and it worked perfectly with small steppers.
    I plan to use it on bigger steppers with different specifications. Two of the motors are identical and...
  15. Need help regarding microstepping driver 2M656

    Hello everybody,
    I have purchased the 2M656 stepper driver (http://www.jmc-motion.com/en/product/show.php?id=16), but I had before the hobbycnc board and i built the tachus42 and it was easy to...
  16. Replies
    4
    Views
    555

    Re: Hobbycnc pro potential problem

    Problem solved: it was caused by a tiny corrosion at the back of the y axis settings jumpers causing it to be in full step although the jumper is set to be half step.
    Brushed with a teeth brush and...
  17. Replies
    1
    Views
    42

    Re: Hobbycnc pro board potential problem

    Problem solved: it was caused by a tiny corrosion at the back of the y axis settings jumpers causing it to be in full step although the jumper is set to be half step.
    Brushed with a teeth brush and...
  18. Replies
    4
    Views
    555

    Re: Hobbycnc pro potential problem

    Thx john for your reply.
    I checked all the jumpers and connections and they were good, no short or anything else.
    I also checked the software settings and were all correct.
    But Could it be a virus...
  19. Replies
    4
    Views
    555

    Hobbycnc pro potential problem

    Dear all,
    I have my homemade cnc router machine based on hobbycnc pro board.
    The machine was working perfectly and with a high precision, X and Y axis have the same setting (steps per unit,...
  20. Replies
    1
    Views
    42

    Hobbycnc pro board potential problem

    Dear all,
    I have my homemade cnc router machine based on hobbycnc pro board.
    The machine was working perfectly and with a high precision, X and Y axis have the same setting (steps per unit,...
  21. vfd and spindle installation and settings

    hi everybody,
    i have purchased a chinese spindle rated 3 phase 220v 400hz 1.5kw, and an LG SV-IC5 frequency inverter (manual: http://www.rototech.com.au/pdf/SV-iC5.pdf) .
    Please may you advice me...
  22. frequency inverter installation and settings

    hi everybody,
    i have purchased a chinese spindle rated 3 phase 220v 400hz 1.5kw, and an LG SV-IC5 frequency inverter (manual: http://www.rototech.com.au/pdf/SV-iC5.pdf) .
    Please may you advice me...
  23. Replies
    3
    Views
    521

    thx guys, you are right, they are bipolar...

    thx guys, you are right, they are bipolar steppers, but i can,t find a DIY driver board that can handle 6 amps.
  24. Replies
    3
    Views
    521

    Unknown motors specifications

    hello everybody,
    I have 4 motors that I don;t know their exact specifications and would they be useful to be used instead of steppers in my homebuilt cnc machine.
    my cnc machine is built based on 4...
  25. Replies
    1
    Views
    352

    Rack and pinion inaccuracy

    Dear all, I built a cnc machine using rack and pinion mechanism for x and y motion.
    I use mach3 as a controller softwre, and the same settings were given to x and y axis.
    The y axis works great and...
Results 1 to 25 of 58
Page 1 of 3 1 2 3