I have a wire EDM machine, Fanuc Tape Cut Model I (Matra). Quite old but was performing excellent until the last week. The machine no longer has the appropriate cutting speed at the settings where it...
Type: Posts; User: dzcatic
I have a wire EDM machine, Fanuc Tape Cut Model I (Matra). Quite old but was performing excellent until the last week. The machine no longer has the appropriate cutting speed at the settings where it...
Hi Elek,
When the machine is in Auto mode, I cannot run the program with DRY RUN. When I enter that process, after clicking START, the machine just doesn't move the table.
In Manual mode, when...
Hi Elek, thanks a lot for the instructions.
Unfortunately, we are not able to solve the issue. I was checking those parameters as well but no luck :(
It is very unusual, as the machine table...
Hi Elek,
Thank you for the image. Unfortunately, I am not able to find the switch. I don't have machine documentation as well and not able to find what parameter to change.
Please check the...
Hi,
Thank you for your reply. I am looking at it but the only switch I see is for changing parameters.
Do you mind to take a picture please, it may solve my problem too.
Thanks in advance,...
Hello,
I have a wire cutting machine (FANUC TAPE CUT MODEL I, MATRA: 945 Series: 6m system).
The machine was purchased a long time ago in Germany, with no technical documentation supported.
...
Hello,
I have a Wire EDM machine model “FANUC MATRA TAPE CUT MODEL I”. It is an old machine but still works well :)
Couple of weeks ago power supply unit was destroyed, some wires were peeled...
Hello,
Two weeks ago I have replaced "Power supply board" in the machine as it was damaged.
After replacement, I had to insert all machine parameters again because I had to initialize bubble...
I am having trouble in setting machine to tapper cutting.
This is the first time I am trying to cut like this, any kind of help is very appreciated.
Program:
O0001
G92 X0. Y0. I100. J0....
Hello,
I am having problem with the programs which are made in master cam x6 for wire machine. I was wondering if is possible to make programs on two decimals instead of four. If is possible, what...
I want to connect PC to Charmilles Robofil 2020. Is there anyone that can send me cable schema?
Cable connectors RS232 25 pin(m) to 9 pin (f)
Thanks in advance
Not able to start cutting on machine. All Documentation is missing.
I was wondering if someone can send me documentation, more precisely operating instructions (procedure how to start cutting on...
I have solved this problem.
Machine should be in EXE mode, then select MANUAL (F8) then you go on Reference (F1) - Zero Machine then move each axis.
How to send Robofil 2020 in reference point? Can someone write procedure please, I dont have any documentation
I have Heidenhain TNC 426 control unit which uses L code. I need post processor which will display L code instead of G code in MasterCam X6?
Does anyone knows where I can find post processor?
...
I have CNC Sigma (Heidenhain 426 control unit) and want to connect to PC. I have PC running Windows XP professional.
What is the best software to establish connection? I was thinking of CIMCO v6....
The problem is when I turn on the machine nothing shows up on the display. Screen stays black. What can be the problem?
When we received machine all cables were disconnected. After we have...
The problems are following:
1. Not able to use Datum Set for axes. It does not apply inputs. value given by the machine stays the same.
For example when I want to set 0 on axes (X, Y and Z), I...
I have Fanuc Matra EDM machine (Fanuc Tape Cut - Model 1). when I turned on machine alarm showed up. I tried pressing DEL and RESET buttons but it does not work. I also tried PROGRAM and RESET...
I am looking for some suggestions where I can find Bridgeport VMC 1500 or VMC 1000. Does anyone know some web pages where I can find those machines, but they need to be located in Europe.
Thanks.
I got an error on my machine when machine starts working. It immediately display error, when I press start.
It tells me That DSCG system position of the axis V is broken.
How can I solve this...
Problem deals with sending a program on the machine.
When I need to send a program from my computer to machine, on my PC I got a message that program is successfully sent. But machine freezes...
I got an error "C300 Zn track Y error" on my Bridgeport VM 1000, does anyone know how to fix it?
It tells me to press END button to reboot, and after rebooting i got the same error.
For programming I use Master Cam X4 version, but when I need to send program I use Master Cam v9. I want to know is it possible to send the program to machine by using master cam x4
Can someone tell...
yes you are right machine has a wire break light. i will check for this now, I hope that would be a problem.
no it doesn't jump up before the cycle is kicked out. the meter that shows voltage doesn't increase, maybe that is the reason why i got reverse control alarm
hi
I have wire machine, type: Fanuc Matra
When machine should start cutting i got reverse control alarm. I think that I got the alarm because when I turn on generator voltage don't increase.
...
WIRE MACHINE, FANUC MATRA
When I start machining it shows me REVERSE CONTROL ALARM.
The work can not start because voltage stays at 0 but it should increase.
Does anyone know how to fix...