Search:

Hi
The circumstances made us to disassembly our 5.5 KW ECMA servo motor. The servo motor utilize a 20-bit incremental DELTA encoder. But we don't know How is the procedure of encoder alignment and...

Hi
We have a Lenze positioning control 93xx / software version 7 Global drive EVS9326-EP with a 10 KW MCS servo motor utilizing a SRS50 SICK encoder. X8 is the port that is dedicated to HIPERFACE...

jittechnologies
Thanks
Yes my laptop have serial port also, but the controller just have USB port. Just wish I could connect to the controller via Ethernet cable.
Best Regards.

I bought a 5380 CompactLogix, (Just the PLC Unit, with no extra module) for my test bench and education purposes.
My 5069-L306ER is a new one, When I powered it on for the first time, there was no...

Hi

What are the rules for choosing a heidenhain EnDat encoder?

I have a broken encoder on my Baumuller servo motor need to be replaced, Apparently the encoder model is outdated (ECN 1313), and...

Hi

What are the rules for choosing a heidenhain EnDat encoder?

I have a broken encoder on my Baumuller servo motor need to be replaced, Apparently the encoder model is outdated (ECN 1313), and...

Hi experts

I'm trying to diagnose some B&R servo motors (and other brands like stober) and the goal is to build a B&R project for testing B&R motors.
there is a list of what I have for this aim:...

Is it any chance to eliminate C0270 error in my case with replacing the firmware?

Hi

I have a Indradrive o type HCS02 .1E-W001-A-03-NNNN with control section CSB01.1C-SE-ENS-EN1-L1-S-NN-FW, and giongto upgrade the firmware.

The drive has no MMC (multimediacard) and it has...

Experts

Hi

I have a indradrive C HCS02 and a MSK100B-0200-NN-S1-BP0-NNNN motor with a SICK SKS36 on it.

All of a sudden the drive can not read encoder memory with C0270 (error in reading...

mactec54
Oh yes, the wattage are the same.
The servo drive dos not recognize the motor even in panaterm software. Maybe because of the difference between two kind of encoder (five wire encoder and...

Hi

I have a Panasonic Minas A5 servo drive trying to test in free run a Panasonic A6 servo motor, But as there is a mismatch between the motor and the drive, error 95.0 appears, which declares...

Hi.

I'm new with FANUC and looking for a FANUC amplifier which cover more range of FANUC servo motors comparing to others, Just for test run in my workshop (running free of load).

I know FANUC...

Yesterday I connect my ELAU SM motors to an Indramat HCS02 drive (universal single axis model) to see if the commutation is possible via Indramat drive.

The result was awful; My SM motors...

I found that ELAU put an electronic nameplate on their motors so could be easily recognized by ELAU controllers, Does it like an electronic signature so nobody can copy it to a row encoder?
Regards

Some of ELAU SM servo motors utilize SICK STEGMANN encoders of type SRM50. My SM motor had a defective SRM50 and I bought a new one from SICK. I assume new encoders are always data-free and need to...

For your information here is what Kollmorgen manual on "AKM® Servo Motor Selection Guide" (page 54) states:

"Resolver Alignment
With positive DC current into phase W and out of phase V (U floats)...

Hi.
I have a 1326AB servo motor and its resolver is out of tune.I have read somthing about mechanical aligning of servomotor feedbacks. Anybody Knows how is the procedure of mechanical manual...

Hi.

I have a 1326AB servo motor and its resolver is out of tune.I have read somthing about mechanical aligning of servomotor feedbacks. Anybody Knows how is the procedure of mechanical manual...

Hi

Is here any anyone experienceed how can I program an healthy sick encoder according to an unhealthy one via sick programming toll (PGT 11) on my pc (sopas)?

best regards.

Hi guys.
I have a new SRM50-HAV0-K01 encoder and need to Write parameters on it from an old (seemingly broken) SRM50-HAV0-K01 (saying this couse ).
When I try to import data from the old one (via...

Hi guys.
I have boscshrexroth indradrive and servo motor on my hand and I cant configure via Indrawoks ds software.
servo motor type: MSK100B-0200-NN-S1-BP0-NNNN
drive type: Indradrive HCS02 ,...

Hi guys.
I have boscshrexroth indradrive and servo motor on my hand and I cant configure via Indrawoks ds software.
servo motor type: MSK100B-0200-NN-S1-BP0-NNNN
drive type: Indradrive HCS02...

Hi everybody
Yesterday (my deadline) I carried the pack to the factory. when I put the amp in its serie and connected all the wiring department, I can run the motor in the jog mode with MRC2 finally...

Hi guys.
I have a mitsubishi servo mototr on my hand which its encoder need to be replaced. Got a new encoder and still cant running the motor.
servo amplifire: MR-J3-700BS4
servomotor: ...