Hi
I am needing to make a hole group of change to my ISO file once I have made it in the CAM programme ,the videos then being run on Mach 3 .
The problem I have is the the amount and type of...
Type: Posts; User: marktill
Hi
I am needing to make a hole group of change to my ISO file once I have made it in the CAM programme ,the videos then being run on Mach 3 .
The problem I have is the the amount and type of...
Hi all ,
I am just starting to look at using mach3 on a new piece of kit and am trying to get to grips with it and adjust to the differences to what I am used to. So far I like what I see but have...
Hi ,
you should have fine ( small grains ) say 44 grit diamonds in a med / soft bond. If you are getting burning drop the rpm down . also you may do well to back of the side ways feed to less than...
Best cutters i have found Engraving | NICOLAI DIAMANT
you will see they have all the feeds and speeds. I run at 9000 rpm ( but have got 12Kw , and feed side ways at apx 3 foot a min. Please note...
Hi
I am trying to set up a new set of tools on a Egar ( same as a Alpa ) to remove the lines on the edges of flat granite . The tools are similar to the saw drives and have cup wheels that will...
Hi ever one,
thank you in advance for any help or opinion that you may offer.
I have been work on getting my CNC to make 3D scans, as I have very little information to go on I am finding its a case...
Hi ,
after far to long I have dug out the laser scanner and started the process of leaning how it all works has any 1 out there had any previous luck or advice.
I will add more to this post in a...
I have not yet had 1 made but have been looking in to it for some time as I won't to use a more powerful software like Rhino or solid works . It seams that some company's will do this at a fair price...
Nice work its good to see what can can be dune , what soft ware are you using ? and how long did it take for you to get to grips with it.
Thanks for the reply Alan, as far as i can work out if I change the set up in the CAM software it will change all axis which i would prefur not to do. the Z code on some jobs is very over the top...
Hi
i am using a CAD CAM package to make iso files and have that we are getting too finer movements in the Z axis, which is leading to the over heating on larger jobs, the solution i seek is can i...
A good way to hold the job down is cast wax or plaster around it , if your cutter goes into it won't hurt the tools we have tried double side tape and found the water to be a problem . Most of us vac...
Sub it out to a water jet
here s a starter for you to look at you will note most stone cnc are bid and heavy so this will make you think a bit. what maters most is tooling and cooling for stone get the best tools and flood...
I am looking in to a new wire saw and am finding it hard to get good clear information from the manufacturer , they have said the programing uses a graphical language is this the same as G code or...
Hi, is there any 1 using Rhino for stone work . i am making large sections for buildings , like cornices and caps on a pair of 4 axis CNC s and am looking to get a better CAD CAM package. I am...
we cast up tables a few times a year and after they are set hard machine them down to get a surface, even though the table need to be 3000 x 2000 mm we are lucky that the machin is able to do it its...
Hi,
its some time since i posted , Today at work we had a safty addviser come around to help and has surjected we need to fit a means to stop persons getting to the blade on the saw. The saw was...
just change to a Nic' router and found we can push it more than 2 time s faster
can any one help i have a 4 axis num and need a PP
regards mark
should be fairly common these days to make a try but be ware of 2D shapes . the only 2 limits are size of stone and the area the you can cut, we can cut in somthing like 3100x 2000x 600 so the stone...
yep as a rule worth the money
hi ive got a 325 5n ( only 1 in the UK) with all bells and bull... we are mainly making stone details for buildings like windows etc . i think the soft ware and more to the point the easy ( not so...
we can do most any thing but am in old England so would have to ship it which takes around 4 weeks, we have 3D soft ware that ideal for this and made loads in all sorts of stone marble etc
....
like your thoughts may try this soon the blade is over 1000 mm so i hope that there are max sizes to contend with
i have been lead to be belive that only a router type cutters can be used and that interpolating 3 or axis with a sawblade in not possable as the curve of the blade can not be accounted for
is...
has any one tried to model stone or have any reasons to think that this package is / is not good for this type of work, so far i have only tried to import the drawings as a STL and this has worked....
how many people here have been using a bav on stone ?
i have been trying to get to grips with their 3D soft ware which is Wcan 2K and it is nightmare, any one mastered it yet.
any one in Oz ...