Hi Tom,
Re X axis, the encoder did get severe damage. I was in the hopes that the cable was damaged but it is OK.
So I have now ordered new encoder from manufacturer in China.
I will continue...
Type: Posts; User: bsjoelund
Hi Tom,
Re X axis, the encoder did get severe damage. I was in the hopes that the cable was damaged but it is OK.
So I have now ordered new encoder from manufacturer in China.
I will continue...
Hi Tom,
Been down in the workshop doing tests with S/D + Encoder and Y is OK but X is not OK. Some days ago I had a mishap with Z and brake that resulted in Z going down fast and unfortunately my...
Hi Tom,
Well I do what ask me to do, I verified that S/D is working with no Enc feedback. As regards Quadrature Output, you wanted me to go for this during testing in March as it would be much...
Hi Tom,
Now I did have a memory stick with me :rolleyes:
Both X and Y axis move as commanded, several repetitions of size 100000 = 25mm and no loss of position.
329936
329938
329940
Hi Tom,
#1 So I change to No Input and Step Dir and output 4
Starting with X axis only.
Cheers
Bengt
Hi Tom,
As there is severe problems with the Yahoo group I will 'continue' my questions over here assuming all messages comes thru.
Did answer but my message just vanished. So here we...
Really, I have no issues at all with RESISTIVE touch but CAPACITIVE is a disaster.
Cheers
Bengt
There is one document that I cannot get my hands on, with each HS100 there is a document with tables showing feed's and speed's for different brass wires/materials.
Anyone out there that have this...
Hi folks,
I have managed to get hold of documentation in Swedish for my HS100
Case closed
Cheers
Bengt
Hello folks,
I have now got the comms working from PC to HS100 so I now can download gcode from Partmaster WEDM to the Brother WEDM machine.
Serial settings 4800-E-7-2 with no CR/LF commands....
No problems with non-daily replies.
4800-N-8-1 is the standard setting ( got a copy of the users manual in Swedish yesterday). Done all testing with simplest null-modem to full wirered but still...
Problems is no documentation at all so #2 and #3 are a bit problematic as you can clearly understand. #1 = Dolphin Partmaster.
Any help in this matter would be very much appreciated
Cheers
Bengt
Any help in this matter would be very much appreciated.
Cheers
Bengt
Nobody knows?
Hello folks,
Looking for information on how to setup my HS-100 so it will communicate via RS232 DSUB port (not via opto-link).
Any help would be appreciated
Cheers
Bengt
Hello again from Sweden,
Still looking for documentation for this HS-100 :)
Anybody out there who is using or remembers what 'System Constant' in machine setup is for?
I have hand written...
Here a heads up, still looking for users manual for the WEDM HS100
HS100 first cut - YouTube
Now I have the machine working but still in need of manual to get a grip of all parameters that can...
Also very much interested in getting a copy of Brother QD-2 or QD-3 software for win3.1(or DOS) on 3,5"FDD or zip archive via e-mail.
Gday Skeney,
Would you be so kind and have a look for the documents.
Cheers from Sweden
Bengt
Hi folks,
I have just purchased an old 80's W-EDM machine and looking for any kind of documentation for this HS100. Priority if possible to find schematics for power supply and all otrher circuitry...
Hi Charles,
I have the Ver1.24E + serial cable but cannot get any communication with the driver. Have tried installing the SW on W7/32bit and W98SE and no go, I get 'Communicate Error' and some...
That is probably correct as there is one toolholder 5C with MT3 to square lathe tool HSS bits holder.
Hi folks,
Need help to identify this dividinghead that I recently got. I am told it could be 'Elliot' but I cannot find any information on the web.
This one has 5C collets, any tips of its origin...