Search:

Yes, PWE=1 and Mode is MDI.

It is impossible to enter the DGN parameters. (none of them).
Could you please guide me if you know a way to enter them?

Thank you for you reply.
Which DGN parameters are modifiable by the user? What is the DGN backup (D0300-D0499) used for?
My basic problem is that the machine got stuck in MDI mode. However, when...

Yes, I have and also checked again, all of them are correct according to the backup file.
Basically, is it possible to initial the DGN parameters?

I found that the diagnostics parameters are from D0300 to D0499. But it's impossible to enter data to these parameters.
I tested with PWE=1 and PWE=0 but it didn't work. Could you please suggest...

DGN backup number is from N10300 to N10499 but there are not these numbers neither in parameters nor in diagnostics. So how to enter DGN parameters?
I uploaded the backup file. Please see the...

Thanks for your reply, Dear,

I found the backup parameters and I entered them manually and all alarms have solved.
But now the CNC got stuck at MDI mode and can't change mode by the selector....

I found the backup parameters and I entered them manually and all alarms have solved.
But now the CNC got stuck at MDI mode and can't change mode by the selector. Because of this problem, I couldn't...

Hi everyone,

Our Swiss type lathe machine with Fanuc o-t series parameters and programs have deleted and we don't have backup file. I emailed MTB company but they don't support this machine...

Hi TJ,
Thanks for your reply.

Actually, I solved the problem. But now there is a new problem. All parameters and parameters have removed.
I emailed MTB company but they don't support this...

Hello Dear,

We have a Fanuc 0-t series controller. Recently, there is a problem with CNC loading. After the switch on the machine, there is wrong data on the screen.
I have checked the CRT...

Hi
we have a OP030 connected to SINUMERIK 840D .
Sometimes "BT Read dom no db con" occur and after a few days problem solved by itself.

I've read OP030 configuration by 840D but i didn't find...