Search:

Post update:

We just swapped another one from the Okuma L470 and it still won't clear, not sure what is going on?

Hi there,

We started the machine this morning and noticed that the e-stop error, 1700 was not able to be cleared. We thought, well it must be the e-stop that has failed and we grabbed another one...

Hello,

Not sure what has happened to my machine, but after cycling the ATC to clean it up it landed on "standby" tool 5 and threw up that alarm. We are unable to clear the alarm and it has locked...

Hi there,

Thank you for allowing me to download your 15/20 HP Schematic of the vector drive. Do you happen to have a schematic for the newer style 40 HP Vector Drive? This is the one i am stuck...

Hi there,

Error Definitions:

123 SPINDLE DRIVE FAULT - Failure of spindle drive, motor or regen load. This can be caused by a shorted
motor, overvoltage, overcurrent, undervoltage, failure of...

Martin,

A friend of mine mentioned something interesting yesterday that sparked this comment to you. He advised me that the head or laser head would become weak or stop working based on the hours...

Hi Martin,

I have gone ahead and made the proper cut and re-inserted the cable into the port with still no luck. It is still red for the receiving of the y axis. I am lost for words, i was really...

Unfortunately we did not visit Rotterdam but i have a family friend, last name Engelsbel that lives there. Maybe next time my wife and I visit we will come say hello and repay you some how for...

Martin

Without moving the head i have attached a photo of the lense and the mirror to the best i could, it is definitely gold. I have not had a chance to play with the cable yet moving it in and...

Do we have all the proper information such as the laser type of Phytron? Perhaps maybe there is a setting that is not reading correctly? I have also attached some photos of the head itself in hopes...

You think its be re-cut by the previous owner maybe? and not done the right way and now we are facing the problem? I know what you mean about the sharpness of the cable due to the special light...

Martin how would i move the cable itself in different positions if the screws are tight? Are you saying that you want me to giggle the cable and not the computer plug to avoid the risk of killing the...

Martin,

Let me see if i can do anything by moving in and out the connector from the computer. It is the receiving error that we are getting and you did say it looked like it was damaged possibly....

Took a photo of the Y axis plugged in and noticed that one beam is brighter than the other? This may be the problem, im going to remove the cover from the X axis and see how it shines. Is this...

Martin,

Now things have gotten worse, plugged back in the X cable only to see now X is having a "temperature not ok" message as red. It was not there before.. why are things going worse ha? I...

Did you want me to reassemble the plastic covers or plug it in like this to see if i can get it the Y axis to recognize? I can just plug that cable in and not worry about the X. What do you think?

Here is the photos, do you see it moved more in line? Or am i just crazy? haha its soo tiny i am not sure anything happened.

https://app.box.com/s/71s8dvn8krwxqe35v398dh7b3en7bfew

Martin,

I guess ill just unscrew the bracket holding the wire and push it inwards a little bit to match the other side correct? Ill see how far this takes me. Ill get you an updated photo once...

Haha, i like your way of thinking. I have updated the post below with the appropriate photos for comparison of the cable Led's inside, have a look below. If we can't figure it out we can try this...

There is three screws on the connector holding the x and y fiber cables that plug in the back of the computer. Let me open them up and get a real close photo of both for you to inspect and...

Martin,

Opened up the PC to find that the connector was on the right side and all the plugs for both the x and y along with the rounded cable was on X1 but still am getting the error. I tried...

Martin,

I have a post (reply to thread) below dedicated to this issue where there was some concern with the push card power supply and why i am getting these red lights on the x and y axis with...

Morning Martin,

Thanks for the information,I have prepared a bunch of questions here for your return :)

I have entered all the above information found on pg 7 of that inspection report and...

Hi Martin,

Found this document in my books and scanned it in for you, does this still confirm we are 70 x 70? https://app.box.com/s/21ucmiulysddf1cod8kijendvbf9vx4o

More details here:...

Martin,

I have taken the liberty to post up some of the settings i have made in the parameters or so, hoping we can get some configuration files for this machine to have it properly setup. This...

Hi Martin,

Did you have any luck on finding the configuration file for my machine? Perhaps this is the reason why the x and y axis in the deflection head is not working? Do both axis have to be...

Martin,

Ill send you a private message, you just need to provide me with your email address and ill have you setup as a user. That way you can upload anything you want along with that...

Hi Martin,

Strange thing, i noticed when i had the monitor program open to select the deflection head test and it appears to have some sort of error or red button on the Y axis like this screen...

.

I have the red light and have plugged it into the back of the cabinet to where it fits in that flat connector. That black sticker is in the back has been removed from what i can see in the photos,...