Search:

I was able to rewrite the 9001 program to do tool changes, plenty available online and its only 5 or lines long. Only 9000 program I had
It is crazy to me how easy it is to delete all the programs...

Hello, I have EZ Guide on my Doosan 5025 with Fanuc 21i control.
I accidentally deleted all programs(including 9001 tool change program) and was wondering if EZ Guide was windows based and if there...

Yes I agree. I looked through the ladder and figured out which latch was needed to clear the fault. I have a little experience with ladders from my G&L repair days 30 years ago lol. It just took a...

Ah ha, "until it stops moving" . I used the M39 several times in the past vut only to move the arm out of the way. And yes when I tried to resolve this issue, the carousel moved so I stopped and...

I figures it out, thanks
I had to change keep relay 64.4

I found the I/O softkey (I assume that is what you wanted) and was able to save to my PCMCIA card but no idea how to post it here or even read it on my PC since its .000 extension.

LOL I can try, its been 15 years since I got into ladder.
Let me see If I can figure out how

Vertical 5025 machining center
forgot I had to change spindle location for tool change after changing spindle bearings
of course it faulted because keys not lined up
I thought I did everything...

Interesting, thanks, don't know why that would cause axis to move wrong direction and rapid away from home end and slow towards the home end.
Any idea what parameters are so I can see the 3 home...

Thanks for info. I changed 2022 to -111 and yes, axis did move opposite direction but same issue of not being able to home it.
It don't act like its in home mode. if you will, for X-axis. Normally...

Fanic 21i on Daewoo/.Doosan 5020 vertical mill

Shut down for weekend and now after power up the X-axis moves the wrong direction so consequently I can not home machine.

Any idea where to start?

Hello, I have a Fanuc 21i on a Daewoo 5025 vertical machining center.

On power up I get 401 vrdy alarm on all 3 axis.
In trouble shooting it, I replaced the CNC axis control PCB A20B33000392 per...

HI, I am interested in machining cam shafts on my Puma Lathe. I don't have any programming manuals for the Fanuc 18i control. Maybe I even need the Doosan programming manual, no idea. Any idea...