Thanks,, I got it going Now,, I had to uninstall Mach3,, And Reinstall,, Now everything works okay,,
Thanks for Ringing in!!
Cubs
Type: Posts; User: cubby
Thanks,, I got it going Now,, I had to uninstall Mach3,, And Reinstall,, Now everything works okay,,
Thanks for Ringing in!!
Cubs
Using Mach3 software,
Just installed a new ethernet controller, AXBB-E From CNC Drive, Was using a USB interface controller,
Whole new ballgame, I got the Unit working FINALLY,, And Now the...
If My Mach3 doesn't do what I am doing, just simple engraving of Text, I will Go to Mach4 also,,
I just didn't want to have to learn a new Software all over again,
Thanks brother,,
Dale
You using Mach4 Craig?
What I read Craig, is it does work with Their Software, But Also with Mach3 and Mach4, I has Laser out on the Controller,
I'll send it back if it doesn't work,
Dale
Craig,, I ordered this Control / Breakout Board,, It had Good Reviews,, and I think it will work ok,, Hopefully it will,
Have you heard of it,, AXBB-E Ethernet Motion Controller And Breakout...
Craig, I been reading and researching all evening, And I am Going to Try a couple Things, One is To Use Mach3 as it is, Just do some tweaking for the PWM part,
If that doesn't work, I will...
Been using a Red Chinese made USB Breakout board on my Home Built CNC Router for a long Time,
It works great for that purpose, I have Added a 40w AtomStack TTL Laser,
I created another Mach3...
Never mind,, I finally figured it out,, USB Control E-Stops and Limit Switches Setup different in Mach3 than Printer Port Settings,,
Cubs
My Machine was working GREAT, until I decided to add a 4th Rotary Axis,,
Trying to set up another Profile and such I screwed up all my settings,,
Motor Tuning screen would NOT even open,
So I...
As Gomer says: " Thank ya Thank ya Thank ya, !!! Got it to do the Roughing cut on a Chess Piece, It Worked Great,
But when I started the Finishing code, The Tabs at the ends of the chess piece...
Setting Up A- Axis parallel to X? Don't have a Clue,, Do You Mean in Mach3?
IS that Like A Axis being a Slave to X Axis?
Cubs
Gerry,, Does the Rotary Axis have to be Wired to the Y-Axis Motor Driver? Or can it Operate properly with it's own Motor Driver?
I have watched Videos till I'm Blue in the face, And Just can't...
I am Tring my best to learn how to set up The Tool Paths , Roughing and Finishing Paths
For machining Chess pieces, small statues ect, From Importing STL Models and Creating the Toolpaths.
Need...
I do not have a clue, But yes you are right, It actually is zeroed on Stock top, And Is Told to Z .125, But Actually goes to .250 and next to .375
cubs
Here is the file in Text format. Hope this helps, I did figure out how to overcome the problem. I changed the thickness to .625 instead of .750 and it cut dead on .750.
I don't have a clue why. ...
Using Vetric Aspire 9.5,
All I am Trying to cut is a State of Alabama Profile.
Set it up to .750 Thickness, and to cut 6 passes at .125 per pass, with .250 Flat End mill.
Then Error message...
As most that know me, Also know that I am very new to this field, But I enjoy Learning and doing new things,
I appreciate all the help That I have got from many good guys here on this Site,
I...
Thank You so much Mac, I've fooled with this thing all day,, All I got it to do was Jog the Spindle, This is on the Motor Plate.
Model- GDZ105X102-3.5
Volts- 220v
HZ- 300
RPM- 18,000
KW- 3.5kw...
Name is: "BEST" Model FC300-4.0G-S2-B4C
4.0KW 220V
I need help with setting the Parameters on this drive to get Spindle to working,
My New CNC Build,
Surely someone else has ran into...
Ger, I have NO IDEA why this rascal will NOT Reverse with the Config > Homing. But it would NOT,,
I had to Change the Direction by reversing the Motor Directly, And it Turned the Text around...
Thanks Ger,, Will do that today!!!
Everything has been fine on my Home made Mill until my computer bit the dust this past week,
I replace the Computer and had to reload and set back up Mach3 again, Tune Motors the whole setup...
Well My persistence has paid off, But Still have much to learn. Thanks to you guys in the Know,
A couple of Pictures of my build in progress, Les Paul Pro Custom "Peter Frampton Style"
Mahogany...
Thank You Lucas,
I finally Got the Back Procedure Figured out, And Ran The Code in Simulation, And everything looked good,
Except the setup of material is set Long Side in X-Axis, My X-Axis is...
You all know I am just beginning this Craft, And NEED ALL THE HELP I CAN GET!!
I tried to Post the Tap file, NO GO, I tried also to Post the Aspire Vetric File Still NO GO. Files too Big Or Wrong...
Is this Camotics any better than Just running the Simulation in Mach3?
I been just testing the code in Mach3 before ever loading it to a machine, Even then I will cut air until I'm sure this is...
Ger, And All you guys that helped me, I THANK YOU ALL, Great group of guys, I did what Ger told me in the IJ settings and tried another cut,
What was weird is I could NOT SEE anything in the Mach3...
Brother, That is the Way that the App wrote the code with the information that I put into the System,
We all know that there is NO RIGHT Way to write code, There are many ways in achieving the same...
Yes it is evident now as what Ger said about a setting being wrong with the I and J mode,
But I'm not smart enough to find those settings he is referring to, Will do some more reading, The Square...