Search:

N100 T1 ; _ _ _ _ _ _ _ _ _ Prepare tool
N105 G54 ;_ _ _ _ _ _ _ _ _call the zero point offset
N110 EC_TLCH(1,0,1,1,0) ; _ tool turning, tool is substituted into the spindle machine automatically...

Is that a turning machine?

1. Press soft key ”SETTING DATA”
2. Extent button soft key bar
3. Press soft key ”SE-BITS”
SD 5010 ... 00000100 device identification
SD 5011 ... xx xxx 111 9600 Baud (x ... without meaning)...

You have to switch on the data transmission in the 810t
So setting data on plc-prg as it’s described in the manual all data in and start transmission

$A_TOOLMN[t]
Gives out the magazine number of the tools with the T-No.=t.
Is the tool not allocated to the magazine, then 0 is given out.
Is the tool management not active then -1 is given out....

yes, the option and a service technician that can set it up for you

Like Intex said, its worth reading the manuals...
WAITM ( marker Nr., channel 1, channel, channel.....)
So WAITM(1,1,2)

If the machine goes to a particular point (which is set in the parameter) when you do a TOOL CALL, then it will also go there even if you move it to a different position before the change.
I am not...

As I don’t have my ‘magic ball’ around at the moment, I am considering an 840D:

When the mechanics is intact and the controller is correctly aligned, then no wave motions should occur when moving...

Then you can only do it over synchronous actions... We had that topic here in the forum already.
Programming manual 11/ 2006

Yes me,
Have you got the possibility to change the plc program on your machine with Step7?

http://support.automation.siemens.com/WW/view/de/22090242

Then switch to normal display ( e,g, with Uedeit). These are no ARC archives- that is a Siemens ARC format

Open it with an editor.

Have a look in the manual.

I believe you can look at it on the heidenhain webside.

Siemens will view the topic about paying differently..
You shouldn’t publish such data.

The switch to the measuring system needs to be supported by the PLC.
If the manufacturer hasn’t provided that then it’s not possible.

FN18: SYSREAD id2000 nr20 idx xx

Could you give us a decent error description then we can help you.

The easiest way would be to press the help button.
The error comes up when a movement if not programmed with fmax and the spindle stands still.
It’s possible to switch off the surveillance either...

Yes, it’s possible to write such a program. You may also just save the mount data and then edit the file externally.

1. Detect what C-code-group Cut2df is a part of.
2. Set reset mode mask (whether reset mode for G codes is derived from GCODE_RESET_VALUES or not)
3. Set GCODE_RESET_VALUES

Have fun

I assume that 810C is similar to 810D.
Change to initial operation
Set password
Then softkey HMI
key>
softkey choose language.
Then set the first language at German.

Restart the machine.

Maybe http://andron.tcis.de/welcome?set_language=en ?

Or BVS-CNC

Usually it’s 2 times Shift
If it made out in md’s
Md 90009 keyboard-shift-performance at start

Read it out

I have it.
What exactly do you want?

Automatic -> program overview -> edit from hard disk

User guide 4.6.3 load and unload part programs.

For subprograms EXTCALL
(“<Path/ program name>”)

Start the PCU50 in the service mode (windows), install a VNC server.
Then start it as usually and connect to the vnc server via network.

If you don’t want to install a VNC server, start the HMI...

PCU50, PCU50.3 or PCU20?