Thanks for the info we ended up borrowing a induction heat kit popped the pulleys off and removed the motor bearings and replaced them with shiny new ones machine back up and running no problems so...
Type: Posts; User: daleman
Thanks for the info we ended up borrowing a induction heat kit popped the pulleys off and removed the motor bearings and replaced them with shiny new ones machine back up and running no problems so...
need help need to replace the bearings on our vf2 ss spindle motor have removed the motor need to know how haas have fixed the encoder gear and the main drive lug to the spindle .
and how best to...
the pull stud was at least 12 months old and I've never seen one break when just spot drilling
we recently bought a brand new vf2 with the gearbox option my question is has anybody ever had a pull stud break whilst the machine is in motion .
We were spot drilling a hole when there was a noise...
yes the go/nogo mainly the go end will check manufacturers website thanks
I know its not the right forum but can find a suitable one for my question .
right can any one tell me what the major diameter of a 3/8 bsp gauge should be I know the major diameter of the thread is...
Hi we are currently looking for a cnc machining center programmer, setter, opeeator , HAAS or fanuc training is a must.
Were a busy sub machine shop based in Oldham near Manchester if your...
Glad you got it sorted :-)
Engraving Around the Outside of a Rotary Part (G47, G107)
With the Haas Control it is possible to combine a G47 Engraving cycle with a
G107 Cylindrical Mapping cycle to engrave text (or a serial...
G107 is the command code you need look it up in your manual its pretty straight forward
5-Axis Profiler, 5-Axis, Aerospace, MILLAC 853-PF, Okuma
was not that hard to find
you would have to turn the h and t match setting off before you could give a tool a different height offset hit the settings button and scroll down till you find the h and t must match setting think...
Hi guys we have been high speed machining for a few years now and have always used Ma ford solid carbide bullnose end mills.
we recently went to a local trade fair and were quite impressed by the...
Hi guys we have been high speed machining for a few years now and have always used Ma ford solid carbide bullnose end mills.
we recently went to a local trade fair and were quite impressed by the...
I can try that but as all my usb flash drives work on my other Haas machines can't see it being the problem
thanks hopefully someone will have an idea
:mad:hi guys been having trouble with my usb port
the machine will read the contents of a usb but when you try to transfer from the usb to machine or machine to usb the machine just freezes and...
thanks again guys the mo1 does interfere with the prestage in lookahead i had to prestage the tools in my program manualy
thanks guys i thought it would be something simple :D
is there a way of pre selecting tools in a side mount atc so that the tool is ready to change before the previous tool has finished
is the turret rotate sensor working properly we had one go on a super mini mill which caused a turret rotate alarm just an idea before you start spending money on a io board
thanks would not be doing anything to demanding justmed to lge batch work nothing bigger than 2in or 50.8mm dia .
would only be doing mild steel and alu components to tolerences or + - .001in or...
been looking at a 12mth old st20 with bar feed just wanted to know if they are any good or should i stay clear thanks
bit late now but did you check inside the electrical cabinet as haas machines in the uk all seem to come with a spare coiled cable for the remote jog
right a quick update problem reported 23/11/2011
problem finally fixed on 8/12/2011
it was fixed this morning but still from begining to end took 16 days not good but aleast the machine is now...
a quick update the engineer came on mon 28th new parts were ordered they came tue 29th but as yet 3rd dec no one has come to fit them
we can fix most things ourselfs but whilst the machine is still under warrenty then i say make them fix it.
anyway a engineer turned up today told what was causing us the problem but then said he...
I would say though when they turn up they do turn up prepared and usually sort out the problem pretty quick
Claire is great to deal with but whoever she passes the msg had on to does nothing its now Mon morning and still no sign lets see if anyone turns up today i mean its not that were a small machine we...
does anyone have problems with th uk haas service dept
we have a problem on our 8mth old vf3 and after a number of calls to hass and promises of ringbacks from an engineer no solution no callbacks,...