584,817 active members*
4,686 visitors online*
Register for free
Login

Search:

Type: Posts; User: zavateandu

Page 1 of 17 1 2 3 4

Search: Search took 0.03 seconds.

  1. Re: password to edit the ladder on this Gildmaster 400ctx series 2

    yes,you need to atach the pmc file to be read
  2. Re: Fanuc 180i MB - changing parameter 3202 bit "NE9"

    you can read it over ethernet if the machine has etehernet port
  3. Replies
    1
    Views
    186

    Re: Fanuc 0M Alarm 59

    PS059-Program number not found
    check the program again if it has the same numer inside of it as outside of name
  4. Re: Troubling FANUC IPL question - how to enable G10 without resetting all memory on

    when you go to IPL menu you just need to press enter for options you want to keep and change the value only for the option you need to change
  5. Re: Handel and jog mode low spindle RPM . Help

    look in PMC-DATA TABLE,where are the timers,counters,keeprelay
  6. Replies
    4
    Views
    232

    Re: Bit Naming On Star CNC's

    Try it in emergency mode state or go in PMC menu and stop the PMC
  7. Replies
    9
    Views
    531

    Re: Fanuc SRAM Backup Stuck

    On the machine that you want to try the sram and is not loading all 4 files,did you tried to take out the sram?
    Even if the machine is not starting you can take out the old sram to see if it is...
  8. Replies
    0
    Views
    199

    Re: Fanuc Embedded Software System Error

    you did not attached any photo
  9. Re: Problem: Fanuc SV20HV/40HV/80HV won't start

    When the MCC-main contactor is turned on ,the power supply gets power and turn 7 segment led to 0 and all servos are with "-" not blinking in normal state
    so in your case i start looking of the...
  10. Replies
    2
    Views
    288

    Re: scale obsolete change resoloution

    As far as i know there is a servo software update also to be made for that new linear scale to work
    what type of controller you have? 16i,18i,21i,30i,31i,etc?
    what is the version and edition of...
  11. Replies
    2
    Views
    288

    Re: scale obsolete change resoloution

    what values you have in these parameters:
    2023,2024,2084,2085
  12. Re: How download parameters FANUC-18T via RS232

    there are many software to download but i use from long time CIMCO EDIT for transmission
  13. Re: Send and Receive file with Fanuc Series 18i-MB

    Use Program transfer tool from Fanuc for file transfer,is a drag and drop software ,it is cheap ,around 20 euro and is the easy and safe way to transfer files between CNC nad PC
  14. Replies
    2
    Views
    213

    Re: Broken Fanuc O-MD

    First of all say to us if you use the X8.7 or X8.6 signal as skip signal or what wires did you identify and use
    Also if you have the diagram from electric book with the page of skip signal please...
  15. Replies
    11
    Views
    538

    Re: Fanuc Oi Mate-TB : 1006

    First thing you have to do is that when you call T01 you should be sure that the tool is in the center of the spindle and not above or under the spindle line so you know mehcanical the turret is...
  16. Re: FANUC series Oi MB not booting up CPU won´t start. Black screen

    Do not say to people is SRAM issue as you do not make the difference between LED 8 with all 4 greens and one from middle second row is RED on and LED 8 with 4 greens led on and on the second row the...
  17. Re: No. "8" shown on the LED status display -- FANUC Series Oi Mate-MB Controller

    Alarm 8 indicates that the CPU not started,i would recomend to replace the CPU board not the main board

    500188
  18. Re: Wasino LG-71 Spindle drive parameters - HELP!

    what is the code number of the spindle unit?
    is the spindle with 4 digits led in the control PCB and the small yellow case with 4 buttons under it for setting the parameters?
    if yes,AL-17 means...
  19. Re: parameters needed for fanuc ot on leadwell ltc 20 bp

    send me an email with some photos of the machine to see how it looks
    [email protected]
  20. Re: Oi-mf plus — “load program” from USB

    When you use the load program button,the program is copied to that USB Path 1 folder in the CNC MEMORY
    The CNC MEMORY of your machine is indeed 2 MB ,the maxim is 8MB stored in the FROM
    if you...
  21. Re: Oi-mf plus — “load program” from USB

    Hello
    if you are trying to use the DNC mode via the USB option this cannot be performed via USB,only from memory card,etehrnet ,data server or MEMCARD option using the Fanuc lib software to create...
  22. Replies
    105
    Views
    24,211

    Re: Fanuc NC GUIDE

    Agree with this
  23. Re: Is there anyone with Cnc fanuc A06B-6111-H006#H550 driver number 20 alarm solutio

    The alarm 19 is for the U phase and the alarm 20 is for the V phase.
    You need to change the power board A16B-2203-0651 of the drive and the IGBT (transistor module) A50L-0001-0384 and you will be...
  24. Re: Fanuc OM can't run M code in Memory mode

    When you press the start cycle button is that lit(green color) or is not:
    1.If start button is not lit you must check the following:
    -diagnose 122 must be XXXXX001-means machine is in auto mode...
  25. Re: Write Protect Issue - Fanuc Robodrill D21MiB5adv PLUS with 31i-B5 Plus control

    On the new controllers PLUS series of Robodrill ,Fanuc decided not to let the end user mess with the important parameters that refers to 4th and 5th axis as i think you are trying to do now
    you can...
  26. Re: Matsuura MAM 72-35 w/ FANUC 30iA control. Can't view Power Mate Manager Soft Keys

    Parameter 960 bit 3 must be enabled for the Power Mate

    # 3 PMN The Power Mate CNC manager function is:
    0: Enabled.
    1: Disabled.
  27. Re: Urgent help needed, PLEASE Fanuc 21i Model A

    with RESET+DELETE you wiped out all the parameters and programs form your machine
    now you need the back up to put back in ,if you have
    good luck
  28. Replies
    1
    Views
    454

    Re: cambio de idioma fanuc 18imb

    498666
  29. Re: HELP! FTP woes and Program Transfer Tool

    Hello
    I think you have 2 laser machines with that G3D1 versions and i suggest you to upgrade to last version wich is 62 now
    The program transfer tool is using FTP transfer only if you have an...
  30. Replies
    1
    Views
    810

    Re: helping in victor vturn np20

    is the turret unclamping? or is not?
    if it is not unclamped and checked by the sensor ,will not rotate to any toll and after a certain time will give alarm of overtime
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4