Search:

Thank you for taking the time to respond.
You're exactly right that the problem is with Lookahead:
I made the following changes and it worked fine:

(Rotate and Pause)
G103 P1;
G04 P3.;...

2010 HAAS TM-2(pre-NGC)

I'm sending the following commands to my HAAS rotary indexer over RS-232:
(Rotate w/ Pause)
DPRNT[];
DPRNT[ZG90];
DPRNT[ZS180.000];
DPRNT[ZF180.000];
DPRNT[ZL001];...

I know this is an ancient thread, but I'm working on getting rid of my reversal spikes.
But there is no procedure anywhere that I could find as to HOW.
(2010 HAAS TM-2)

What I did:
Put a 1.5"...

Ok figured it out, thanks.
Although I had SHOW HARD DRIVE TAB enabled, I actually did NOT have HARD DRIVE ENABLED set to "1".
That did the trick.

2010 TM-2.
It has the Ethernet option and I have set it up to successfully interact with a NAS share.
I also set up its own internal "ACCESS TO CNC SHARE" as "FULL" and can see it from my computer...

Ok looks like it bolts to the side of the control panel.
The air gun sort of hangs there, but I suspect the remote safety pushbutton thing is supposed to hang there. The guy I bought it from...

Machine is not full enclosure.
The way it is constructed tells me it should be mounted to the right side of the machine, but there is no mounting hole there.Does HAAS typically suggest the owner...

That's the thing, it wasn't bolted to the machine. I assumed it was to hang an air line or T-Slot cleaner, but can't find where the hell it could mount. Don't really want to drill a hole.

I purchased a 2010 TM-2 with 10 ATC.
Everything is working great, but there is this bracket (Pictured).
I can't figure out where it bolts to or what it's for.
Anyone?!?!?
434210
434244

Hey I'm curious what you did with the umbilical that comes off of the Z axis? My ceiling is 100" high and it seems like the umbilical goes up to around 110"?
Also, could the rear service door be...

He apparently bought it at auction as is. Was hoping someone around here might have one or know of one.
Not sure JT would want to sell to me.

I purchased a 1720 some months ago. Being ignorant, I didn't realize that it did not have a tailstock on it.
If anyone has a tailstock available I'd like to buy it. There was some talk in the past...

This is on the motor for the lathe spindle on Shoptask 1720XMTC...
Trying to figure out what it does....
The brass knob on the front can be pulled out, rotated 90-deg and set into a shallow slot....

I have a gear set i can sell you. I will take a picture of the gears and email them to you.
I'm looking for a tailstock for the same machine. You wouldn't happen to have lead on one should you?

I just picked up a 1720 XMTC with 3 working axes CNC. But its missing its tailstock. I spoke with Shoptask and they indicated that many owners have upgraded to the new style tailstock and might have...